Product Search
Search results for 'D1587'
Showing 181 - 200 of 1648 Total Results
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams.. Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks are...
Speedy 2000 Moisture Tester 20 gr.
SA-0250
Location: Moisture Testing
The Speedy 2000 Moisture Tester from Test Mark is widely accepted for determining the free moisture content of a variety of materials - sand, aggregates, soil and other powders.
CA-2660
Location: Parts & Accessories
These plastic-lined sample bags are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory. The plastic lining retains moisture in samples to ensure more accurate test results. The bags are made from heavy-yarn drill cloth woven diagonally for extra strength...
CA-0287
Location: Cement
Metal retainer caps are used with the cube molding system. Sold in sets of 2. Compression pads are used with retainer caps in the cube molding system. Pads are molded for consistent shape and thickness. Sold in sets of 4 – red (80 duro) or 4 – clear (90 duro).
SA-2015
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 2.416" (61mm) high, 5-15/16" (150.8mm) dia.
SA-2015-L
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 1.416" (36mm) high, 5-15/16" (150.8mm) dia.
AA-0012
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 4" model.
AA-0013
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 6" model.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
SA-0109-L
Location: CBR Accessories
LBR mold. 6" ID x 6" H with 2" detachable collar. Mold volume of 1/13.33 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder. LBR requires Spacer Disc, sold separately.
Material Handling Pan, 15" x 30" x 4" deep (381 x 762 x 102mm)
CA-2480
Location: Parts & Accessories
Steel handling pans have a chute end and swing down handles to permit oven access. 15" by 13" by 4" deep model.
Material Handling Pan, 12" x 20.5" x 4" deep (305 x 521 x 102mm)
CA-2485
Location: Parts & Accessories
Steel handling pans have a chute end and swing down handles to permit oven access. 12" x 20.5" x 4" deep model.
4" Beam Fixture Conversion Kit
MA-0119-CK
Location: Test Platens and Spacers
Economical way to convert your Test Mark MA-0117-A1 or MA-0119-A1 Flexural Beam Fixture for testing beams with depths of either 4” or 6”. Kit Includes: One each Ball and Rod Support Base, eight Support Spring Locking Pins, two roll pins for Rod Base and one Top Support Transition Plate with 4”...
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
Digital Manometer, NIST Certified
AA-0073-T
Location: Parts & Accessories
Features a digital display with a range of 0 to 1000 mm Hg. Includes a ten-point NIST traceable certificate of calibration.
Plastic Beam Mold 6" x 6" x 21"
CA-0340
Location: Plastic Beam Molds
Test Mark's durable, lightweight plastic beam mold uses simple thumbscrews for easy stripping, cleaning, and assembly.
CA-0356-P
Location: Concrete
Plastic base plate with convenient cut-out carrying handles and inscribed with concentric circles. Dimensions 36" x 36" x 1/2".
