Product Search
Search results for 'D1559'
Showing 201 - 220 of 1123 Total Results
CA-2860-01
Location: Concrete
Sturdy 3-legged painted steel stand is 20.5 in. high with adjustable neoprene rubber feet for leveling and isolation from vibration.
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
CA-1992
Location: Wet Washing Sieve
The stainless steel mesh cement washing sieve features nickel-plated brass frame and legs for support when drying.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
CA-4060-01
Location: Aggregate
Plastic measuring cylinders are 17 in. high, 1 1/4" inside diameter and are graduated from 0 - 15 in. by 0.1 in. graduations from bottom of cylinder.
Dynamic Cone Penetrometer only
SA-1225
Location: Dynamic Cone Penetrometer
The Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20" and can be used effectively in augured holes to depths of 15 to 20 feet. The DCP features a heat treated cone and zinc plated components.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
Screen Shaker Manual Clamping **DISCONTINUED**
CA-2151
Location: Shakers
Test Mark supplies screen shaker manual clamping for the aggregate testing industry.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
(2) options
Location: Galvanized Pans
Galvanized material pans from Test Mark are used for performing concrete and aggregate test preparation.
SA-1800
Location: Soil Grinder
Soil grinder prepares soil samples to designated particle size for accurate and repeatable test results. Unit grinds a one-pint sample in 15 seconds. Includes a No. 10 perforated stainless plate.
CA-0600-08P
Location: Parts & Accessories
Plastic Case for Volumetair Meter. Plastic Roll-A-Meter Kit replacement parts.
Plastic Tamping Rod 5/8" x 12"
CA-0600-09P
Location: Parts & Accessories
Plastic Tamping Rod 5/8" x 12". Plastic Roll-A-Meter Kit replacement parts.
Wire Cloth Field Rocker Screen Set
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
CA-1990
Location: Wet Washing Spray Apparatus
Test Mark's Wet Wash Spray Apparatus consists of a valve, pressure gauge, piping and spray nozzle.
AA-0012
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 4" model.
AA-0013
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 6" model.
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
