Product Search
Search results for 'T-121'
Showing 201 - 220 of 1124 Total Results
SA-1122
Location: Manometer Tubes
The economical free-standing Manometer Tube from Test Mark allows each tube to have its own valve to allow running two tests.
CA-3110
Location: Vicat Apparatus
Modified Vicat Apparatus from Test Mark is used for false set determination of Portland cement mortar.
AA-0300
Location: Asphalt Mixer
Test Mark's asphalt/concrete mixer is ideal for sample or batch mixing in either laboratory or field. Easy and secure ordering online.
30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2742
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 30 Gallon (114L) tank is 24" x 18" x 18" deep (610 x 457 x 457 mm). Maximum operating temperature is 140°F (60° C).
44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2744
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).
SA-1302
Location: Probe Rod
For protection against possible electrical shock when working around buried electrical lines. T-handle has high density nylon cover. Shaft is 1/2" dia. x 48" long, steel tip measures 5/8" x 3/4". NOTE: Because size and weight will vary with quantities ordered, we have reserved the freight charges...
AA-0040
Location: Marshall Hand Compaction Hammer
The Hand Compaction Hammer set from Test Mark Industries facilitates hand compaction of 4-inch samples.
CA-3100
Location: Vicat Apparatus
The Vicat Consistency Apparatus is part of a complete line of cement testing equipment from Test Mark Industries.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
(2) options
Location: Sample Bags
Plastic-lined sample bags from Test Mark are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory.
CA-0500-42
Location: Air Meter Calibrators
Brass reusable calibration vessel can be used with any 1/4 cu. ft. concrete pressure meter. Vessel is exactly 5% air by volume when placed in the pressure meter base. Part of our air meter calibrator products.
CA-4020
Location: Proportional Caliper
The proportional caliper from Test Mark is a timesaving device used for rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of .375" or larger.
Marshall Automatic Single Compactor, 4" Stationary Mold
AA-0020
Location: Marshall Automatic Compactor
The Marshall Automatic Compactor apparatus from Test Mark compacts samples at a preset number of hammer blows and shuts off on completion.
CA-3000
Location: Flow Tables
Hand driven flow tables are used to determine consistency of cement mortars. A test specimen is molded on the table to a specified volume and shape.
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
(4) options
Location: Retainers & Pads
Test Mark supplies grout sample unbonded capping system for compression testing of grout specimens in concrete testing environments.
Speedy Moisture Reagent, 10 lb. can
SA-0262
Location: Soils
Calcium Carbide Reagent is used with the Speedy Moisture Tester to create pressure proportional to moisture in test samples. Supplied in 10-lb. can.
