Product Search
Search results for 'C-403'
Showing 241 - 260 of 1124 Total Results
CA-0236
Location: Micrometer
This concrete micrometer was designed to accurately measure the diameter of concrete cylinders with a range of 5.5 - 6.5in.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
(2) options
Location: Manometer
The Digital Manometer features a digital display with a range of 0 to 1000 mm Hg, and accuracy range is + 0.5% of full scale capacity - available from Test Mark.
AA-0032
Location: Asphalt
This pedestal stabilizes molds during compaction. 8 x 8 x 18" wooden post capped with a 12 x 12 x 1" steel plate. Mounts to a concrete slab with four angle brackets.
(4) options
Location: Centrifuge Extractors for Asphalt
Centrifuge Extractors from Test Mark are designed for use in the separation of asphaltic mixtures to determine bitumen percentage.
(5) options
Location: Yield Buckets
Steel yield buckets from Test Mark are used for determining the unit weight of aggregate for concrete.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
CA-4005
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Set of 3.
CA-2670
Location: Specific Gravity Flasks
The le chatelier flask from Test Mark is used to determine the relative density of cement or sand and other fine materials.
SC-0900 Series Compact Balance
(7) options
Location: EK Series Compact Balance
SC-0900 Series Compact Balance features include full digital calibration with optional user definable mass setting, AC adapter (included) or Ni-MH rechargeable battery pack (optional).
CA-0700
Location: Chase Air
The Chase Air Indicator from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Density Drive Sampler, 3" ( 76.2 mm)
SA-1355
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 3" model.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
Sieve, 8" dia., #200 Mesh, Full Height, Brass Frame, Stainless Mesh
CA-1870-08FS
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
Sieve, 8" dia., #200 Mesh, Half Height, Brass Frame, Stainless Mesh
CA-1870-08HS
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
CA-2861
Location: Concrete
1/2" ID discharge tube orifice is used with grouts having 35 seconds or less efflux time.
CA-2862
Location: Concrete
Special 3/4" orifice is used with thick grouts with efflux time of more than 35 seconds.
