Product Search
Search results for 'D-6951'
Showing 301 - 320 of 1648 Total Results
Sieve, 8" dia., #100 Mesh, Full Height, Brass Frame, Stainless Mesh
CA-1850-08FS
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
Sieve, 8" dia., #100 Mesh, Half Height, Brass Frame, Brass Mesh
CA-1850-08HB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
Sieve, 8" dia., #100 Mesh, Half Height, Brass Frame, Stainless Mesh
CA-1850-08HS
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
Constant Head Permeameter Cell, 2.5" (63.4 mm)
SA-1110
Location: Parts & Accessories
Cells are used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils. Two manometer ports are grooved & screened on the inside. 100 mesh screens are used to prevent migration of material through valves & tubing during test. Top cap...
(2) options
Location: Proctor Molds, split
Split proctor molds from Test Mark are manufactured from steel with all parts plated for longer life.
Vebe Consistometer, ASTM C1170
CA-0374
Location: Parts & Accessories
The Vebe Consistometer determines the consistency and density of low slump roller-compacted concrete. The sample is placed in the mold and the surcharge weight is placed on top. The vibrator is started and the time for the concrete to consolidate and form a mortar ring is recorded. The surcharge is...
Vebe Consistometer, ASTM C1176
CA-0376
Location: Parts & Accessories
The Vebe Consistometer determines the consistency and density of low slump roller-compacted concrete. The sample is placed in the mold and the surcharge weight is placed on top. The vibrator is started and the time for the concrete to consolidate and form a mortar ring is recorded. The surcharge is...
AA-0012
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 4" model.
AA-0013
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 6" model.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
SA-0650
Location: Mortar & Pestle
Soil mortar, when used with the pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior. Rubber-tipped pestle is 8" long and is for grinding soils without breaking individual particles.
CA-1310
Location: Hot Plates
These durable hotplates are equipped with thermostatic temperature control. Baffle-vented welded stainless-steel case and cast-aluminum top for maximum heat transfer, strength and corrosion resistance.
CA-2730
Location: Specific Gravity Bench
The density basket from Test Mark is used to determine bulk specific gravity and absorption of coarse aggregates.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
SA-0660
Location: Parts & Accessories
Plain form hydrometer has an approximate length of 280 mm. The ASTM 151H is graduated with a range of 0.0995 to 1.038 in 0.001 divisions at 68° F for specific gravity. The ASTM 152H has a range of -5 to +60 grams in 1 gram divisions at 68° F for grams of soil colloids per liter. Hydrometer jars are...
CA-0242
Location: Parts & Accessories
This caliper accurately measures the ends of concrete cylinders. Range is 6" x 0.0005". Zero calibration, on/off switch and protective carrying case. Jaw depth is 1.5".
CA-0900
Location: Parts & Accessories
Up to 22 standard 6" x 12" concrete test cylinders can be stored at 72° +/- 2°F over an ambient temperature range of -10 to 100°F. A lockable lid prevents tampering, bottom valve for easy draining, requires a minimum 15 amp circuit, 115V/60 Hz. Economy model has heating temperature control only...
SA-0651
Location: Mortar & Pestle
Soil Mortar, when used with the rubber tipped pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior.
CA-3128
Location: Vicat Apparatus
The Brass Mold from Test Mark is used with the Modified Vicat Apparatus for Consistency and Set Time.
CA-1990
Location: Wet Washing Spray Apparatus
Test Mark's Wet Wash Spray Apparatus consists of a valve, pressure gauge, piping and spray nozzle.
