Product Search
Search results for 'D-2041'
Showing 341 - 360 of 1648 Total Results
(3) options
Location: Erlenmeyer Flask
The Bomax Erlenmeyer Flask from Test Mark has a narrow mouth, tooled top finish, metric capacity scale and are thick walled.
Straight-Edge 1/8" x 1 1/4" x 8" long (3 x 32 x 200 mm)
SA-0114
Location: Flow Tables
Straightedges are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
SC-0900 Series Compact Balance
(7) options
Location: EK Series Compact Balance
SC-0900 Series Compact Balance features include full digital calibration with optional user definable mass setting, AC adapter (included) or Ni-MH rechargeable battery pack (optional).
Feeler Gauge Set, .002 to .025
CA-0485
Location: Planeness/Thickness Gauges
When used with the steel parallel bar, Test Mark's feeler gauge will determine the planeness of testing machine platens, cylinder cappers and other testing accessories.
(3) options
Location: Straight-Edges
Straightedges from Test Mark are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
Wire Cloth Field Rocker Screen Set
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
CA-0217
Location: Cylinder Transport
The steel concrete cylinder carrier from Test Mark is used for carrying 6-inch dia. cylinders in the field or lab.
Automatic Load Control Retrofit Package (Transducer Included)
TM-4200-T
Location: Parts & Accessories
Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)
SC-0124
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
3" dia. x 10" long Shelby Tube
SA-1380
Location: Parts & Accessories
3" dia. thin walled sampling tubes are galvanized steel. A chamfered end forms a cutting edge, includes holes for securing tubes to a drive head. Plastic caps hold sample in tube during transportation and storage. Drive Head is for use with drive hammers with "E" rod connection.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams.. Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks are...
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
SA-0380
Location: Parts & Accessories
Flat bottom, seamless tin sample cups with covers.
CA-0970
Location: Test Hammer (Rebound)
The calibration test anvil from Test Mark Industries is used to check the calibration accuracy of a test hammer.
Screen Shaker Manual Clamping **DISCONTINUED**
CA-2151
Location: Shakers
Test Mark supplies screen shaker manual clamping for the aggregate testing industry.
