Product Search
Search results for 'D5581'
Showing 721 - 740 of 1648 Total Results
CA-0360-P
Location: Slump Testing
Test Mark's plastic slump cones for concrete testing are more economical than metal cones and will not rust or dent.
CA-0350
Location: Brushes
Test Mark provides stiff wire brushes for lab and field use in materials testing applications.
CA-0351
Location: Brushes
Test Mark provides natural horsehair bench brushes for lab and field use in materials testing applications.
CA-4060-07
Location: Aggregate
Wide mouth funnel suitable for directing the test specimen into the sand equivalent test cylinder.
6.5" dia. x 1" Thick Lower Platen
MA-0600
Location: Parts & Accessories
6.5" dia. x 1" Thick Platen.
Min-Max Thermometer DISCONTINUED
CA-0790
Location: Min/Max Thermometers
Test Mark's min-max thermometer indicates present temperature and the highest/lowest temperatures since last setting of markers.
Exhaust Chamber for Bench Oven
CA-1425-04
Location: Ovens & Hot Plates
Exhaust chamber adapter is available for processing material where undesirable fumes are present. Encloses the oven exhaust and allows venting into a standard 3" (76 mm) stove pipe.
SA-2013
Location: CBR Accessories
CBR Penetration Piston has 3 sq. in. (19.35cm2) base area and is about 7-1/2" (191mm) long. Designed for use in conjunction with weights to apply penetration surcharge loads.
SA-2030
Location: CBR Accessories
Used in the application of surcharged loads on the soil's surface during soaking and penetration. Rust-resistant.
SA-2031
Location: CBR Accessories
Used in the application of surcharged loads on the soil's surface during soaking and penetration. Rust-resistant. Slotted.
SA-1402
Location: Soils
Weights used to ensure uniform and repeatable weight is applied during testing for accurate readings.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2742
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 30 Gallon (114L) tank is 24" x 18" x 18" deep (610 x 457 x 457 mm). Maximum operating temperature is 140°F (60° C).
44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2744
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).
CA-4030-01
Location: Aggregate
Cylindrical measure has a locating hole to fit a lug on the funnel stand to ensure each sample is tested with precision and repeatability.
Indicating Drierite, 1 lb., Blue
AA-0122
Location: Drierite
Blue dessicant turns red to show absorption and may be reused. One of our Drierite products.
AA-0125
Location: Parts & Accessories
Heavy wall filter flask with hose connection and silicone stopper; 1000 ml model.
AA-0015
Location: Marshall Basic Compression Testing
The dial indicator consists of a maximum position brake assembly and guide sleeve. Accommodates 4" or 6" breaking heads. Graduations of 0.01" div., range 1.00"...
