Product Search
Search results for 'T283'
Showing 821 - 840 of 1647 Total Results
CA-3132
Location: Cement
Glass plate for use with all Vicat Apparatus is 4" x 4" x 3/16" (101.6 mm x 101.6 mm x 4.8 mm).
CA-0851
Location: Cement
Penetrometer Foot is a stainless steel disk, 2.70" (68.58 mm) dia. for use with masonry mortars to determine board life and initial consistency.
CA-0205-01
Location: Concrete
For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. 48 oz. refill sold in packs of 2.
CA-0205-02
Location: Concrete
For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. 8 oz. shaker dispenser sold in packs of 2.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
CA-4009
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Case of 75.
CA-0356-P
Location: Concrete
Plastic base plate with convenient cut-out carrying handles and inscribed with concentric circles. Dimensions 36" x 36" x 1/2".
CA-2860-01
Location: Concrete
Sturdy 3-legged painted steel stand is 20.5 in. high with adjustable neoprene rubber feet for leveling and isolation from vibration.
Vapor Emission Test Kit , 12 per pkg.
CA-2595
Location: Parts & Accessories
This vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations. Kit consists of a calcium chloride container, plastic dome cover with seal, pH test kit, and step-by step instructions. Three kits...
Sieve, 12" dia., #8 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1750-12FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
