Product Search
Search results for 'C150'
Showing 921 - 940 of 1123 Total Results
Floating Thermometer DISCONTINUED
CA-0792
Location: Parts & Accessories
Test Mark Industries supplies floating thermometers as part of a complete line of construction materials testing equipment.
(3) options
Location: Erlenmeyer Flask
The Bomax Erlenmeyer Flask from Test Mark has a narrow mouth, tooled top finish, metric capacity scale and are thick walled.
CA-0789
Location: Min/Max Thermometers
Test Mark's min-max thermometer indicates present temperature and the highest/lowest temperatures since last reset.
CA-1460
Location: Gloves
Rubber gloves from Test Mark provide excellent protection when removing concrete cylinders or asphalt samples from curing tanks or water baths.
Motorized Sieve Shaker, 8" & 12" Sieves
CA-1506
Location: Shakers, Economy
Motorized sieve shaker holds 11 full height or 19 half height 8" diameter sieves, or 7 full height, 11 intermediate height or 13 half height 12" diameter sieves. Supplied with a 30 minute timer and 1/4 hp motor.
(3) options
Location: K-Type Digital Thermometer
Test Mark's pocket-sized thermometers accept Type K or J thermocouples with standard connectors, and provide accurate temperatures over an exceptionally wide range.
AA-0035
Location: Asphalt
Holder mounts on compaction pedestal and centers the compaction mold over the center of the post. Mold holder keeps mold, collar and base plate securely positioned during compaction.
CA-0935
Location: Specimen Curing
The curing tank circulator from Test Mark is a silent submersion pump with 120 GPH rating. Easy and secure online ordering.
CA-0915
Location: Specimen Curing
Portable curing chest is lightweight and easily folded for storage. Made with advanced polymers and vinyl with 1/2" cooler foam, chest holds up to eight (9) 6" x 12" concrete test cylinders.
(2) options
Location: Material Handling Pans
Steel handling pans have a chute end and swing down handles to permit oven access.
CA-1500
Location: Shakers, Gilson
Test Mark provides Gilson sieve shakers for 8-inch sieves. Easy ordering online.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.
CA-4060-07
Location: Aggregate
Wide mouth funnel suitable for directing the test specimen into the sand equivalent test cylinder.
Bench Scale, 16 lbs. x 0.0002 lbs. (8000 g x 0.1 g)
SC-0122-A
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)
SC-0124
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Exhaust Chamber for Bench Oven
CA-1425-04
Location: Ovens & Hot Plates
Exhaust chamber adapter is available for processing material where undesirable fumes are present. Encloses the oven exhaust and allows venting into a standard 3" (76 mm) stove pipe.
SA-2013
Location: CBR Accessories
CBR Penetration Piston has 3 sq. in. (19.35cm2) base area and is about 7-1/2" (191mm) long. Designed for use in conjunction with weights to apply penetration surcharge loads.
SA-2020
Location: CBR Accessories
Dial indicator has 1.000" operating range, graduated in 0.001" divisions, clockwise movement and revolution counter. Recommended for use with tripod attachment.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
CA-2170
Location: 30 Minute Timer
Plug aggregate equipment into the outlet at the back of the timer. Then plug timer cord into a wall outlet and turn the knob to the desired time. Time switch will turn off equipment automatically when time expires.
