WOC 2024

Product Search

Search results for 'C150'

Showing 941 - 960 of 1123 Total Results

30 Minute Timer

CA-2170

Location: 30 Minute Timer

Plug aggregate equipment into the outlet at the back of the timer. Then plug timer cord into a wall outlet and turn the knob to the desired time. Time switch will turn off equipment automatically when time expires.

30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)

30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)

CA-2742

Location: Parts & Accessories

Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 30 Gallon (114L) tank is 24" x 18" x 18" deep (610 x 457 x 457 mm). Maximum operating temperature is 140°F (60° C).

44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)

44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)

CA-2744

Location: Parts & Accessories

Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).

Powder Refill, 2 pack

CA-0205-01

Location: Concrete

For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. 48 oz. refill sold in packs of 2.

Dispensers of Powder, 2 pack

CA-0205-02

Location: Concrete

For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. 8 oz. shaker dispenser sold in packs of 2.

Gold Probes, Case of 75

Gold Probes, Case of 75

CA-4009

Location: Concrete

Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Case of 75.

SCC Plastic Base Plate

CA-0356-P

Location: Concrete

Plastic base plate with convenient cut-out carrying handles and inscribed with concentric circles. Dimensions 36" x 36" x 1/2".

Bench Scale, 16 lbs. x 0.0002 lbs. (8000 g x 0.1 g)

SC-0122-A

Location: Parts & Accessories

Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.

Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)

Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)

SC-0124

Location: Parts & Accessories

Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.

Sieve Pan, 8" dia., Full Height, Brass

Sieve Pan, 8" dia., Full Height, Brass

CA-2010

Location: Parts & Accessories

Drive point with 1' Rod

Drive point with 1' Rod

SA-1200-01

Location: Soils

1' E Drill Rod Extension

1' E Drill Rod Extension

SA-1200-03

Location: Soils

30" E Drill Rod

30" E Drill Rod

SA-1200-04

Location: Soils

Point for E Rod

Point for E Rod

SA-1200-05

Location: Soils

Quick Release Powder Kit

CA-0205

Location: Pad Cap Quick Release Powder

For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. Kit includes 8 oz. powder dispenser and 48 oz. of refill powder.

Surface Thermometer

(2) options

Location: Surface Thermometer

Surface thermometers from Test Mark put the sensing element into direct contact with the surface to measure the temperature.

Basic Sieve Shaker, 8" Sieves

CA-1508

Location: Shakers, Economy

Test Mark provides basic sieve shakers for 8-inch sieves. Easy online ordering.

Rubber Stopper

CA-4060-10

Location: Aggregate

Stopper fits the sand equivalent test cylinder.

Paper Disc, 4"

AA-0050

Location: Asphalt

Circular, smooth-edged 4" diameter disc fits in bottom of 4" compaction molds prior to compaction test. Facilitates removal of sample specimen from mold.

Splitter Spacer Assembly (see note)

MA-0122-A

Location: Parts & Accessories

tensile splitter.