Product Search
Search results for 'C-172'
Showing 121 - 140 of 1123 Total Results
SA-0360
Location: Soils
Glass plate with ground finish on one side and seamed edges. Dimensions: 12" x 12" x 3/8" thick.
(2) options
Location: Rebar Locator
Test Mark's Rebarscope™ locates reinforcement bars in concrete and determines their depth and size.
CA-0933
Location: Specimen Curing
The curing tank immersion heater from Test Mark has an adjustable thermostat and a 1,000 watt 15 amp incolloy shielded heating element that resists rust.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers. . The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel...
CA-1450
Location: Gloves
Test Mark's heat resistant gloves are used for handling heated items when conducting laboratory work with ovens or hot plates.
(3) options
Location: Test Platens
Used for testing 6” (152 mm) concrete cubes and cylinders in compression . The platens bearing block is 6.5” (152 mm) square, through hardened to HRC 55 or greater, plane to .0005” (.012 mm) in any 6” (152 mm) area, has concentric circles for easier centering of cylinders and is hard nickel plated...
(2) options
Location: Digital Thermometers
Test Mark supplies digital thermometers as part of a complete line of construction materials testing equipment.
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
Concrete Cylinder Length Measuring Device for 4 & 6''Dia-24''L
CA-0237
Location: Core Length
With the core length measuring device measurements can be taken at the center point of the sample's upper end as well as the 8 equidistant points along the circumference.
Circulating Water Bath, Digital
AA-0065
Location: Circulating Water Bath
The circulating water bath from Test Mark is fully insulated with magnetic circulator for heating up to 12 4-inch diameter Marshall samples at a time.
CA-0600-05P
Location: Parts & Accessories
Meter bottom base. Plastic Roll-A-Meter Kit replacement parts.
SA-0362
Location: Plastic Limit
Test Mark's Plastic Limit Roller for soils is a unique time-saving device designed to produce consistent results by an easily repeatable mechanical technique.
CA-1460
Location: Gloves
Rubber gloves from Test Mark provide excellent protection when removing concrete cylinders or asphalt samples from curing tanks or water baths.
(2) options
Location: Manometer
The Digital Manometer features a digital display with a range of 0 to 1000 mm Hg, and accuracy range is + 0.5% of full scale capacity - available from Test Mark.
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
Modified Vicat for Masonry Mortars
CA-3120
Location: Vicat Apparatus
The Modified Vicat Apparatus determines the consistency and consistency retention of mortar used with brick and block applications.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
(4) options
Location: Beam Molds
Steel Concrete Beam Molds from Test Mark are used for molding third or center point test samples.
