Product Search
Search results for 'D6926'
Showing 121 - 140 of 1648 Total Results
CA-2181
Location: Parts & Accessories
Unit supplied with a permanent water connect with regulator valve, tubing, saddle valve, stainless-steel goose-neck water tube with swivel connection, and a 6' power cord with GFCI (ground fault circuit interrupter) for operator safety.
3¼" Standard Hand Auger Assembly
SA-1201
Location: Parts & Accessories
Hand augers with quick connectors feature heavy gauge, heat treated carbon steel bucket with cupped blades to facilitate hole advancement. Auger head, extensions and T-handle are zinc electroplated for rust resistance.
Location: Soils
Test Mark's COE Manual Compaction Hammer features a recoil mechanism in the foot assembly to reduce impact fatigue.
SA-0100-S
Location: Parts & Accessories
Molds are manufactured from steel with all parts plated for longer life. Wing nuts mount on both sides of collar for easy assembly and stripping. Split molds have two quick-acting clamps.
CA-3130
Location: Vicat Apparatus
Used with CA-3110 Modified Vicat Apparatus for false set determination, mold is 2" x 2" x 6" (50mm x 50 mm x 150mm). Overall length including base is 9 ¼" (240 mm).
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
(2) options
Location: 6" Cube Mold
This single cavity cube mold with base plate is used for compression testing of concrete cubes or mortar samples in the "Time of Initial" and "Final Setting" of concrete. Dimensions: 6" x 6" x 6" (152 x 152 x 152 mm).
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
Prism Mold 2"x 2"x 10" - 2 gang
CA-2960
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
Prism Mold 1"x 1"x 10" - 2 gang
CA-2955
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
SC-0056
Location: Scales
Hard carry case with lock for the Triple Beam Balance. A foam insert keeps the scale safe and secure with space for the tripod legs and weight set.
SA-0665
Location: Hydrometer Jar Bath
Hydrometer Jar Bath from Test Mark Industries holds up to eight hydrometer jars at the same time.
Prism Mold 3"x 3"x 10" - 1 gang
CA-2962
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Application: volume change of cement paste,...
CA-2720
Location: Specific Gravity & Absorption Fine Aggregates
The conical mold and tamper from Test Mark are used to determine bulk and apparent specific gravity and absorption of fine aggregate.
SA-1800
Location: Soil Grinder
Soil grinder prepares soil samples to designated particle size for accurate and repeatable test results. Unit grinds a one-pint sample in 15 seconds. Includes a No. 10 perforated stainless plate.
Prism Mold 4"x 4"x 10" - 1 gang
CA-2964
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Application: volume change tests.
CA-4020
Location: Proportional Caliper
The proportional caliper from Test Mark is a timesaving device used for rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of .375" or larger.
CA-0500-43
Location: Air Meter Calibrators
Aluminum Air Meter Calibrator quickly checks the accuracy of any pressure-type concrete air meter with a .25 cu. ft. base - from Test Mark Industries.
