WOC 2024

Product Search

Search results for 'C-185'

Showing 1 - 21 of 560 Total Results

Straight-Edges

(3) options

Location: Straight-Edges

Straightedges from Test Mark are for striking-off samples in molds or containers. Made of ground steel with beveled edges.

Flow Caliper

CA-3030

Location: Flow Tables

Used to measure mortar diameter and indicate percentage of flow.

Cutting Edge

SA-2032

Location: CBR Accessories

Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.

Mortar, 320 ml

SA-0650

Location: Mortar & Pestle

Soil mortar, when used with the pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior. Rubber-tipped pestle is 8" long and is for grinding soils without breaking individual particles.

Flow Cones

(2) options

Location: Flow Cones

The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.

400 ml Measure

CA-3032

Location: Flow Tables

Measure is calibrated to 400 ml and is used to determine air content of hydraulic cement mortar. Cylindrical measure is 3" (76 mm) ID and approximately 3 15/32" (88 mm) deep.

Sample Ejector

SA-0113

Location: Sample Ejector

The Soil Sample Ejector from Test Mark is used for removing soil samples from molds up to 7 in. long and 2, 3 and 4 in. dia. Shelby Tubes.

Automatic Soil Compactor

SA-2250

Location: Mechanical Soil Compactor

The automatic soil compactor from Test Mark is designed to automatically compact soil samples rapidly and produce a uniform degree of compaction.

Proportional Caliper Device

CA-4020

Location: Proportional Caliper

The proportional caliper from Test Mark is a timesaving device used for rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of .375" or larger.

Prism Molds

(5) options

Location: Prism Molds

1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.

Mortar, 500 ml

SA-0651

Location: Mortar & Pestle

Soil Mortar, when used with the rubber tipped pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior.

Masonry Series Testing Machines

(8) options

Location: Manual Compression Testing Machines

Test blocks, masonry prisms, pavers and retaining wall units., Testing range from 1% to full machine capacity, with an accuracy of ±.5% of indicated load., Optional accessories for testing a full range of concrete and cement products. . Request a Quote Masonry series machines are available in two...

Cylinder Platen, 6 ½” Diameter

(3) options

Location: Test Platens

Free floating bearing platen seats under test pressure. . Used when testing 6” (152 mm) or 4” (101 mm) diameter concrete cylinders in compression. Platen is manufactured from steel with all components plated for corrosion resistance. Upper cylinder platen used when testing 6” (152 mm) or 4” (101...

Cylinder Molds - Plastic

(8) options

Location: Cylinder Molds - Plastic

Test Mark Industries features plastic concrete cylinder molds as part of a complete line of concrete testing equipment.

Flow Table, Motorized

CA-3010

Location: Flow Tables

Motorized flow tables from Test Mark Industries are used to determine consistency of cement mortars. Features a 10-inch dia. cast bronze table.

Proctor Molds, split

(2) options

Location: Proctor Molds, split

Split proctor molds from Test Mark are manufactured from steel with all parts plated for longer life.

Stainless Steel Pans

(3) options

Location: Stainless Steel Pans

Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.

Calipers

(2) options

Location: Calipers

Dial calipers and digital calipers are available as part of a full line of concrete testing equipment from Test Mark Industries.

6" (152 mm) Cube Test Set

(3) options

Location: Test Platens

Used for testing 6” (152 mm) concrete cubes and cylinders in compression . The platens bearing block is 6.5” (152 mm) square, through hardened to HRC 55 or greater, plane to .0005” (.012 mm) in any 6” (152 mm) area, has concentric circles for easier centering of cylinders and is hard nickel plated...

Proctor Molds

(2) options

Location: Proctor Molds

Proctor molds from Test Mark are manufactured from steel with all parts plated for longer life.