Product Search
Search results for 'C185'
Showing 1 - 21 of 563 Total Results
CA-3032
Location: Flow Tables
Measure is calibrated to 400 ml and is used to determine air content of hydraulic cement mortar. Cylindrical measure is 3" (76 mm) ID and approximately 3 15/32" (88 mm) deep.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
CA-0700
Location: Chase Air
The Chase Air Indicator from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Modified Vicat for Masonry Mortars
CA-3120
Location: Vicat Apparatus
The Modified Vicat Apparatus determines the consistency and consistency retention of mortar used with brick and block applications.
Blaine Air Permeability Apparatus
CA-2970
Location: Blaine Air Permeability
The Blaine Air Permeability Apparatus from Test Mark determines the fineness of Portland cement on terms of specific surface expressed as total surface area in square centimeters per gram of cement.
CA-3150
Location: Gillmore Apparatus
The Gillmore Apparatus is used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime and certain mortars.
CA-3200
Location: Tube Samplers
THe Bulk Cement Tube Sampler from Test Mark is used for sampling hydraulic cement in bulk shipments.
CA-3210
Location: Water/Cement Ratio
The Cementometer is used for rapid determination of the moisture content of fresh cement and concrete, available from Test Mark Industries.
CA-4030
Location: Void Content
The void content apparatus from Test Mark is used to determine the non-compacted void content of a fine aggregate sample.
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
(4) options
Location: Manual Compression Testing Machines
Testing range of 4,000 to 400,000 lbs. (17.8 – 1,780 kN) with an accuracy of ±.5% of indicated load., Rigid heavy duty load frame design. . Request a Quote Designed to meet the demands of production testing programs where day to day performance is required. Its heavy duty load frame features...
CA-4030-01
Location: Aggregate
Cylindrical measure has a locating hole to fit a lug on the funnel stand to ensure each sample is tested with precision and repeatability.
CA-3202
Location: Tube Samplers
The Packaged Cement Tube Sampler from Test Mark Industries is used for sampling packaged hydraulic cement.
Modified Vicat for Consistency and Set Time
CA-3115
Location: Vicat Apparatus
The Modified Vicat Apparatus from Test Mark Industries tests hydraulic cement mortars.
(5) options
Location: Manual Compression Testing Machines
Testing range of 300 to 30,000 lbs. (1.3 to 133.5 kN) with an accuracy of ±.5% of indicated load., Compact design requires minimal floor space. . Request a Quote The CM-30 was developed for testing concrete beams where accuracy and maintaining their required load pacing rate is an essential part of...
(8) options
Location: Manual Compression Testing Machines
Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty hydraulic pump runs quieter, cooler and...
Masonry Series Testing Machines
(8) options
Location: Manual Compression Testing Machines
Test blocks, masonry prisms, pavers and retaining wall units., Testing range from 1% to full machine capacity, with an accuracy of ±.5% of indicated load., Optional accessories for testing a full range of concrete and cement products. . Request a Quote Masonry series machines are available in two...
(8) options
Location: Manual Compression Testing Machines
Testing range of 3,000 to 300,000 lbs. (13.3 – 1,334 kN) with an accuracy of ±.5% of indicated load., Load frame stiffness of 10.5 million lbs/in, stronger than any competitive machine in its class., Choose a basic budget-minded digital or an advanced indicator that automatically calculates and...
CA-2900
Location: Cube Molds
Cement Cube Sand from Test Mark is used for preparing hydraulic cement mortars for 2-inch (51 mm) cube compression testing.