WOC 2024

Product Search

Search results for 'D-6927'

Showing 1 - 21 of 563 Total Results

Marshall Breaking Head, 4"

AA-0010

Location: Marshall Basic Compression Testing

The lower segment of Test Mark's Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments.

Marshall Breaking Head, 6"

AA-0011

Location: Marshall Basic Compression Testing

The lower segment of the Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments - from Test Mark.

Masonry Series Testing Machines

(8) options

Location: Manual Compression Testing Machines

Test blocks, masonry prisms, pavers and retaining wall units., Testing range from 1% to full machine capacity, with an accuracy of ±.5% of indicated load., Optional accessories for testing a full range of concrete and cement products. . Request a Quote Masonry series machines are available in two...

CM-30 Series

(5) options

Location: Manual Compression Testing Machines

Testing range of 300 to 30,000 lbs. (1.3 to 133.5 kN) with an accuracy of ±.5% of indicated load., Compact design requires minimal floor space. . Request a Quote The CM-30 was developed for testing concrete beams where accuracy and maintaining their required load pacing rate is an essential part of...

Lottman Breaking Head, 4"

AA-0012

Location: Marshall Basic Compression Testing

Lottman breaking heads are used for testing tensile strength; 4" model.

Lottman Breaking Head, 6"

AA-0013

Location: Marshall Basic Compression Testing

Lottman breaking heads are used for testing tensile strength; 6" model.

CM-5000 Series

(4) options

Location: Manual Compression Testing Machines

Testing range of 5,000 to 500,000 lbs. (22.2 – 2,224 kN) with an accuracy of ±.5% of indicated load., Frame stiffness rating of 41.6 million lbs/in., Easier specimen loading with large platen table. . Request a Quote Our CM-5000 series machines feature rigid distortion-resistant load frames...

Vertical Cappers

(3) options

Location: Vertical Cappers

Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.

Marshall Compaction Stationary Mold, 4"

AA-0045

Location: Marshall 4" Compaction Molds

Marshall Compaction Stationary Mold is for hand and non-rotating base compactors and is machined from seamless tubing and plated - from Test Mark Industries.

CM-3000 Series

(8) options

Location: Manual Compression Testing Machines

Testing range of 3,000 to 300,000 lbs. (13.3 – 1,334 kN) with an accuracy of ±.5% of indicated load., Load frame stiffness of 10.5 million lbs/in, stronger than any competitive machine in its class., Choose a basic budget-minded digital or an advanced indicator that automatically calculates and...

Marshall Automatic Single Compactor, 4" Stationary Mold

AA-0020

Location: Marshall Automatic Compactor

The Marshall Automatic Compactor apparatus from Test Mark compacts samples at a preset number of hammer blows and shuts off on completion.

Marshall Compression Tester

AA-0005

Location: Marshall Basic Compression Testing

The Marshall compression machine from Test Mark features threaded rods and heavy duty steel crosshead, for nearly twice the rigidity of other load frames, for more reliable test results.

CM-4000 Series

(4) options

Location: Manual Compression Testing Machines

Testing range of 4,000 to 400,000 lbs. (17.8 – 1,780 kN) with an accuracy of ±.5% of indicated load., Rigid heavy duty load frame design. . Request a Quote Designed to meet the demands of production testing programs where day to day performance is required. Its heavy duty load frame features...

Constant/Falling Head Permeameter Set

(5) options

Location: Constant/Falling Head Permeameter Set

Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.

Marshall Compaction Rotating Mold, 4"

AA-0046

Location: Marshall 4" Compaction Molds

Marshall Compaction Rotating Mold is used for preparing test specimens with rotating mold compactors - from Test Mark Industries.

Tamping Rods

(4) options

Location: Tamping Rods

Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.

Dial Flowmeter

AA-0015

Location: Marshall Basic Compression Testing

The dial indicator consists of a maximum position brake assembly and guide sleeve. Accommodates 4" or 6" breaking heads. Graduations of 0.01" div., range 1.00"...

High Capacity Series Compression Testing Machines

(3) options

Location: Manual Compression Testing Machines

Accuracy range of ±.5% of indicated load from 1% to machine capacity. . Request a Quote High capacity series machines feature rigid distortion-resistant load frames that are designed to meet the demands of testing high-performance concrete in a production testing program, where accurate and...

CM-2500 Series

(8) options

Location: Manual Compression Testing Machines

Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty hydraulic pump runs quieter, cooler and...

Marshall Automatic Double Compactor, 4" Rotating Mold

AA-0022

Location: Marshall Automatic Compactor

Automatically compacts two samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.