Product Search
Search results for 'D6927'
Showing 1 - 21 of 563 Total Results
AA-0011
Location: Marshall Basic Compression Testing
The lower segment of the Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments - from Test Mark.
AA-0010
Location: Marshall Basic Compression Testing
The lower segment of Test Mark's Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments.
Masonry Series Testing Machines
(8) options
Location: Manual Compression Testing Machines
Test blocks, masonry prisms, pavers and retaining wall units., Testing range from 1% to full machine capacity, with an accuracy of ±.5% of indicated load., Optional accessories for testing a full range of concrete and cement products. . Request a Quote Masonry series machines are available in two...
(5) options
Location: Manual Compression Testing Machines
Testing range of 300 to 30,000 lbs. (1.3 to 133.5 kN) with an accuracy of ±.5% of indicated load., Compact design requires minimal floor space. . Request a Quote The CM-30 was developed for testing concrete beams where accuracy and maintaining their required load pacing rate is an essential part of...
AA-0013
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 6" model.
AA-0012
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 4" model.
(4) options
Location: Manual Compression Testing Machines
Testing range of 5,000 to 500,000 lbs. (22.2 – 2,224 kN) with an accuracy of ±.5% of indicated load., Frame stiffness rating of 41.6 million lbs/in., Easier specimen loading with large platen table. . Request a Quote Our CM-5000 series machines feature rigid distortion-resistant load frames...
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
(8) options
Location: Manual Compression Testing Machines
Testing range of 3,000 to 300,000 lbs. (13.3 – 1,334 kN) with an accuracy of ±.5% of indicated load., Load frame stiffness of 10.5 million lbs/in, stronger than any competitive machine in its class., Choose a basic budget-minded digital or an advanced indicator that automatically calculates and...
AA-0005
Location: Marshall Basic Compression Testing
The Marshall compression machine from Test Mark features threaded rods and heavy duty steel crosshead, for nearly twice the rigidity of other load frames, for more reliable test results.
(4) options
Location: Manual Compression Testing Machines
Testing range of 4,000 to 400,000 lbs. (17.8 – 1,780 kN) with an accuracy of ±.5% of indicated load., Rigid heavy duty load frame design. . Request a Quote Designed to meet the demands of production testing programs where day to day performance is required. Its heavy duty load frame features...
Marshall Compaction Stationary Mold, 4"
AA-0045
Location: Marshall 4" Compaction Molds
Marshall Compaction Stationary Mold is for hand and non-rotating base compactors and is machined from seamless tubing and plated - from Test Mark Industries.
Constant/Falling Head Permeameter Set
(5) options
Location: Constant/Falling Head Permeameter Set
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
(4) options
Location: Tamping Rods
Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.
High Capacity Series Compression Testing Machines
(3) options
Location: Manual Compression Testing Machines
Accuracy range of ±.5% of indicated load from 1% to machine capacity. . Request a Quote High capacity series machines feature rigid distortion-resistant load frames that are designed to meet the demands of testing high-performance concrete in a production testing program, where accurate and...
AA-0015
Location: Marshall Basic Compression Testing
The dial indicator consists of a maximum position brake assembly and guide sleeve. Accommodates 4" or 6" breaking heads. Graduations of 0.01" div., range 1.00"...
Marshall Compaction Rotating Mold, 4"
AA-0046
Location: Marshall 4" Compaction Molds
Marshall Compaction Rotating Mold is used for preparing test specimens with rotating mold compactors - from Test Mark Industries.
(8) options
Location: Manual Compression Testing Machines
Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty hydraulic pump runs quieter, cooler and...
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
CA-2080
Location: Sieve Storage Rack
This adjustable bench rack holds all diameters of sieves up to 12" (305mm) maximum. Stainless steel rack has non-skid rubber feet, and two permanent and two adjustable rubber-coated sieve support rods.