Product Search
Search results for 'D1587'
Showing 1 - 20 of 1123 Total Results
(5) options
Location: Shelby Tubes
Shelby Tubes from Test mark feature a chamfered end that forms a cutting edge, and includes holes for securing tubes to a drive head.
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
Density Drive Sampler, 3" ( 76.2 mm)
SA-1355
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 3" model.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
Dynamic Cone Penetrometer only
SA-1225
Location: Dynamic Cone Penetrometer
The Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20" and can be used effectively in augured holes to depths of 15 to 20 feet. The DCP features a heat treated cone and zinc plated components.
Drive Tubes, 3" x 2.75" (76.2 x 69.9 mm), 10/pkg
SA-1371
Location: Density Drive Sampler
For use with Drive Sampler, 3" (76.2mm) x 2.75" (69.9mm) length, (3" x 0.01 ft3). Accessory to the density drive sampler.
(2) options
Location: Compaction Hammers
Soil Compaction Hammers from Test Mark are machined from steel and plated for rust resistance. Easy online ordering.
iD-Indicator
Location: Digital Load Indicating Systems
Dual operating language option – display all test setup menu programs in either English or Spanish., Automatically calculates and displays peak stress at the end of a test. . Digital display in English Digital display in Spanish The iD indicator is the system of choice for testing programs where...
CA-3200
Location: Tube Samplers
THe Bulk Cement Tube Sampler from Test Mark is used for sampling hydraulic cement in bulk shipments.
Drive Tubes, 4" x 5.00" (101.6 x 127 mm), 10/pkg
SA-1372
Location: Density Drive Sampler
For use with Drive Sampler, 4" (101.6mm) x 5" (127mm) length, (4" x 0.033 ft3).
(2) options
Location: Galvanized Pans
Galvanized material pans from Test Mark are used for performing concrete and aggregate test preparation.
SA-0113
Location: Sample Ejector
The Soil Sample Ejector from Test Mark is used for removing soil samples from molds up to 7 in. long and 2, 3 and 4 in. dia. Shelby Tubes.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
Pad Caps and Retainer Rings - Steel
(16) options
Location: Unbonded Capping (Retainers and Pad Caps)
Pad caps and retainer rings are available from Test Mark as part of a complete line of concrete testing equipment and supplies.
SA-1122
Location: Manometer Tubes
The economical free-standing Manometer Tube from Test Mark allows each tube to have its own valve to allow running two tests.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
