Product Search
Search results for 'C1176'
Showing 221 - 240 of 1657 Total Results
Portable Precision Balance, 6000 g x 0.1 g
SC-0195
Location: Parts & Accessories
The Portable Precision Balance from Test Mark features selectable weighing units, percentage weighing and below balance weighing functions, stainless steel pan, adjustable feet, low battery indicator and auto-power shut off, manual internal calibration with built in mass, RS-232 and USB interface,...
SA-0660
Location: Parts & Accessories
Plain form hydrometer has an approximate length of 280 mm. The ASTM 151H is graduated with a range of 0.0995 to 1.038 in 0.001 divisions at 68° F for specific gravity. The ASTM 152H has a range of -5 to +60 grams in 1 gram divisions at 68° F for grams of soil colloids per liter. Hydrometer jars are...
AA-0050
Location: Asphalt
Circular, smooth-edged 4" diameter disc fits in bottom of 4" compaction molds prior to compaction test. Facilitates removal of sample specimen from mold.
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
2" x 4" (50 x 102 mm) Black Plastic Mold no lip 75/ctn
CA-0232
Location: Parts & Accessories
Molds are injected plastic for close tolerances and consistency of shape. Molded, ribbed configuration gives added strength. Seamless design prevents moisture loss. Shipped 75 per carton. Plastic lids are sold separately.
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
CA-0358
Location: Self-Consolidating Concrete
The V-Funnel is used to measure flowability of fresh self-consolidating concrete. The funnel is filled and the time taken for it to flow through the apparatus is measured. A valve on the outflow port can be closed to allow SCC to settle, which indicates the tendency for segregation.
CA-1990
Location: Wet Washing Spray Apparatus
Test Mark's Wet Wash Spray Apparatus consists of a valve, pressure gauge, piping and spray nozzle.
CA-0890
Location: Sling Psychrometer
The Sling Psychrometer from Test Mark determines relative humidity with a matched pair of organic filled 20-120° F x 1° thermometers to measure wet and dry bulb temperatures.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
Constant/Falling Head Permeameter Set, 2.5" (63.4 mm)
SA-2200
Location: Parts & Accessories
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water. Funnel provides adjustable constant head reservoir. Top cap applies 5-10 lbs. of force against top stone or screen to...
CA-0480
Location: Planeness/Thickness Gauges
Test Marks' steel parallel planeness gauge determines the planeness of testing machine platens, cylinder cappers and other testing accessories.
CA-2570-01
Location: Aggregate
Replacement abrasive charge for LA Abrasion Machine, consists of 12 hardened steel balls.
CA-2670
Location: Specific Gravity Flasks
The le chatelier flask from Test Mark is used to determine the relative density of cement or sand and other fine materials.
SA-3501
Location: Marsh Funnel
The Marsh Funnel provides quick measurements for reporting mud consistency. Fluid viscosity if the ratio of speed of the sample as it passes through the outlet tube (shear rate) to the amount of force (fluid weight) that is causing the fluid to flow (shear stress). Frequent reporting will show...
Marshall Automatic Single Compactor, 4" Stationary Mold
AA-0020
Location: Marshall Automatic Compactor
The Marshall Automatic Compactor apparatus from Test Mark compacts samples at a preset number of hammer blows and shuts off on completion.
(4) options
Location: Crack Monitors
Concrete crack monitors from Test Mark are simple, accurate devices for monitoring crack movement.
Industrial Balance, 12 kg x 0.1 g
SC-1430
Location: Parts & Accessories
Industrial Balance features swing arm type display, internal calibration, below balance weighing with optional under-hook, auto power off, AC adapter. User selectable weighing units of g, kg, lb, oz, ct, dwt, ozt, mom TL, ms, tola, ds.
CA-0300
Location: Parts & Accessories
Lightweight steel beam molds are used for molding third or center point test samples. Molds are hinge free to collapse into interchangeable parts for easy stripping, cleaning and quick reassembly with wing nuts.
