Product Search
Search results for 'C192'
Showing 241 - 260 of 1123 Total Results
44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2744
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
AA-2000
Location: Reflux Extractor
The Reflux Extractor Set from Test Mark, used for asphalt testing, features 2 cones, each with a 1000g capacity.
(2) options
Location: Surface Thermometer
Surface thermometers from Test Mark put the sensing element into direct contact with the surface to measure the temperature.
CA-2570
Location: LA Abrasion
The LA Abrasion Machine from Test Mark tests crushed rocks, slag and gravel for resistance to abrasion.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
Cylinder Platen, 6 ½” Diameter
(3) options
Location: Test Platens
Free floating bearing platen seats under test pressure. . Used when testing 6” (152 mm) or 4” (101 mm) diameter concrete cylinders in compression. Platen is manufactured from steel with all components plated for corrosion resistance. Upper cylinder platen used when testing 6” (152 mm) or 4” (101...
6" x 12" Cylinder Lifting Handle
CA-0216
Location: Cylinder Transport
The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 6" by 12" model.
Speedy Moisture Reagent, 10 lb. can
SA-0262
Location: Soils
Calcium Carbide Reagent is used with the Speedy Moisture Tester to create pressure proportional to moisture in test samples. Supplied in 10-lb. can.
SA-0210
Location: Sand Density
The Density Plate provides a flat, stable base for the sand cone apparatus - available from Test Mark Industries.
SA-1120
Location: Manometer Tubes
The economical, wall mount Manometer Tube from Test Mark is built for use with many permeameters.
AA-0040-A
Location: Marshall Testing
Set includes Hand Compaction Hammer, 4" Compaction Mold, Compaction Pedestal with Top Plate, Hammer Support Rod with Adjustable Guide and Compaction Mold Holder.
CA-2710
Location: Specific Gravity & Absorption Fine Aggregates
Test Mark's pycnometer is used to determine specific gravity of fine aggregates. Easy online ordering.
Location: Soils
Test Mark's COE Manual Compaction Hammer features a recoil mechanism in the foot assembly to reduce impact fatigue.
Location: Concrete
Experts recommend the RH test as the most reliable in-depth measuring method for concrete moisture available today. The Blue Peg System measures relative humidity, temperature and dew point using a single microchip, factory calibrated to NIST standards. Each Blue Peg comes with a NIST traceable...
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
Metric Individual Calibration Weights, NIST Traceable
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weights include an NIST Traceable Certificate. Weights are stainless steel construction, no adjusting cavity, with handling knob - Test Mark Industries.
SA-2030
Location: CBR Accessories
Used in the application of surcharged loads on the soil's surface during soaking and penetration. Rust-resistant.
SA-2031
Location: CBR Accessories
Used in the application of surcharged loads on the soil's surface during soaking and penetration. Rust-resistant. Slotted.
