Product Search
Search results for 'D-2041'
Showing 241 - 260 of 1123 Total Results
(3) options
Location: Erlenmeyer Flask
The Bomax Erlenmeyer Flask from Test Mark has a narrow mouth, tooled top finish, metric capacity scale and are thick walled.
SC-0900 Series Compact Balance
(7) options
Location: EK Series Compact Balance
SC-0900 Series Compact Balance features include full digital calibration with optional user definable mass setting, AC adapter (included) or Ni-MH rechargeable battery pack (optional).
Feeler Gauge Set, .002 to .025
CA-0485
Location: Planeness/Thickness Gauges
When used with the steel parallel bar, Test Mark's feeler gauge will determine the planeness of testing machine platens, cylinder cappers and other testing accessories.
(3) options
Location: Straight-Edges
Straightedges from Test Mark are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
Wire Cloth Field Rocker Screen Set
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
CA-0217
Location: Cylinder Transport
The steel concrete cylinder carrier from Test Mark is used for carrying 6-inch dia. cylinders in the field or lab.
Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)
SC-0124
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams. . Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks...
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
Screen Shaker Manual Clamping **DISCONTINUED**
CA-2151
Location: Shakers
Test Mark supplies screen shaker manual clamping for the aggregate testing industry.
CA-0970
Location: Test Hammer (Rebound)
The calibration test anvil from Test Mark Industries is used to check the calibration accuracy of a test hammer.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
Bench Scale, 16 lbs. x 0.0002 lbs. (8000 g x 0.1 g)
SC-0122-A
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
