WOC 2024

Product Search

Search results for 'C-1231'

Showing 261 - 280 of 1124 Total Results

RH/Moisture Meter Kit

Location: Concrete

Experts recommend the RH test as the most reliable in-depth measuring method for concrete moisture available today. The Blue Peg System measures relative humidity, temperature and dew point using a single microchip, factory calibrated to NIST standards. Each Blue Peg comes with a NIST traceable...

Interchangeable 3/4" orifice

Interchangeable 3/4" orifice

CA-2862

Location: Concrete

Special 3/4" orifice is used with thick grouts with efflux time of more than 35 seconds.

Vacuum Extractor

AA-2055

Location: Vacuum Extractor

Vacuum Extractor from Test Mark is used for quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.

6" x 12" Cylinder Lifting Handle

CA-0216

Location: Cylinder Transport

The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 6" by 12" model.

CPW+ Series Digital Field Scales

(10) options

Location: Digital Field Scales

Digital field scales from Test Mark feature four selectable weighing units, 12-inch square stainless steel platform, remote indicator with large 1-inch LCD display, and water resistant keypad.

Sample Cart

CA-0212

Location: Cylinder Transport

Sample cart is painted steel with two shelves. Overall dimensions 34" x 17" x 31 ½" (864 x 432 x 800 mm). Load capacity is 400 lbs. (181 kg). Ships unassembled.

Pocket Scales

(1) option

Location: Portable Scales

Test Mark pocket scales have a combination pan and cover that slides back for weighing and forward to cover the display and keys for storage or transport.

Blaine Air Permeability Apparatus

CA-2970

Location: Blaine Air Permeability

The Blaine Air Permeability Apparatus from Test Mark determines the fineness of Portland cement on terms of specific surface expressed as total surface area in square centimeters per gram of cement.

Aggregate Washers

(3) options

Location: Aggregate Washers

Aggregate samples are automatically washed with Test Mark's aggregate washers to remove clay and other fines passing a No. 200 sieve.

4" x 8" Cylinder Lifting Handle

CA-0213

Location: Cylinder Transport

The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 4" by 8" model.

Sand Equivalent Shaker

CA-4052

Location: Sand Equivalent

The mechanical motor-driven sand equivalent shaker from Test Mark is recommended for performing sand equivalent tests on a regular basis.

Flow Cones

(2) options

Location: Flow Cones

The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.

Replacement Blade

SA-1056

Location: Soils

Stirring Paddle with 3 blade surfaces, 3/4" (19mm) dia. for mixer. Shaft threads onto mixer.

Curing Tank Heater & Circulating Pump Kit

CA-0933-K

Location: Specimen Curing

This kit combines Test Mark's curing tank immersion heater and 30 watt silent submersion circulating pump at a discounted price.

Rubber Mallet, 16 oz.

CA-0470

Location: Rubber Mallet

The rubber mallet from Test Mark is used to consolidate materials and release entrapped air in concrete molds, air meters, slump cones and unit weight buckets.

Asphalt Dispenser, 4 Qt. (3.8 L)

AA-3000

Location: Asphalt Dispenser

Asphalt Dispenser features a round melting pot has stainless steel crucible & shell to facilitate easy clean up - from Test Mark Industries.

Rhoma-Sol™ Specialty Emulsifier

AA-3128

Location: Emulsifier

Spray-on solution used to remove bituminous deposits and stains from test equipment, contains no hazardous petroleum solvents and is 100% biodegradable.

Circulating Water Bath, Digital

AA-0065

Location: Circulating Water Bath

The circulating water bath from Test Mark is fully insulated with magnetic circulator for heating up to 12 4-inch diameter Marshall samples at a time.

Paper Disc, 4"

AA-0050

Location: Asphalt

Circular, smooth-edged 4" diameter disc fits in bottom of 4" compaction molds prior to compaction test. Facilitates removal of sample specimen from mold.

Marshall Breaking Head, 6"

AA-0011

Location: Marshall Basic Compression Testing

The lower segment of the Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments - from Test Mark.