Product Search
Search results for 'D-2041'
Showing 261 - 280 of 1123 Total Results
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
CA-0970
Location: Test Hammer (Rebound)
The calibration test anvil from Test Mark Industries is used to check the calibration accuracy of a test hammer.
High Strength Capping Compound
CA-0100-HS
Location: Capping Compound
Test Mark's High Strength Capping Compound is easily melted, pours smoothly, has a high compressive strength, and gives consistent test results.
CA-1515-S
Location: Sifter, Laboratory
Designed to accept up to 10 - 8" dia. full height sieves or 6 12" dia. intermediate height sieves plus pan and cover. Sifter quietly rotates and taps sieve frame from below with plastic composite tamper.
Cylinder Platen, 6 ½” Diameter
(3) options
Location: Test Platens
Free floating bearing platen seats under test pressure. . Used when testing 6” (152 mm) or 4” (101 mm) diameter concrete cylinders in compression. Platen is manufactured from steel with all components plated for corrosion resistance. Upper cylinder platen used when testing 6” (152 mm) or 4” (101...
Modified Vicat for Consistency and Set Time
CA-3115
Location: Vicat Apparatus
The Modified Vicat Apparatus from Test Mark Industries tests hydraulic cement mortars.
CA-2861
Location: Concrete
1/2" ID discharge tube orifice is used with grouts having 35 seconds or less efflux time.
CA-2862
Location: Concrete
Special 3/4" orifice is used with thick grouts with efflux time of more than 35 seconds.
CA-0600-P
Location: Air Entrainment/Roll-A-Meter
The PVC and fiberglass reinforced Roll-A-Meter from Test Mark measures entrained air in any type of concrete, including lightweight mixes.
Feeler Gauge Stock, .001 - 12"L x 1/2"W with rounded ends
CA-0481
Location: Parts & Accessories
When used with the steel parallel bar, Test Mark's feeler gauge stock will determine the planeness of testing machine platens, cylinder cappers and other testing accessories.
CA-0245
Location: Vibrator
The lightweight electric concrete vibrator from Test Mark vibrates concrete test cylinders and molds in the laboratory or field.
Permeability Compaction Hammer
SA-1126
Location: Permeability Compaction
Test Mark's Permeability Compaction Hammer is part of a complete line of soil testing supplies and equipment.
Sieve Cover, 8" dia., With Ring, Brass
CA-2020
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
Concrete Cylinder Length Measuring Device for 4 & 6''Dia-24''L
CA-0237
Location: Core Length
With the core length measuring device measurements can be taken at the center point of the sample's upper end as well as the 8 equidistant points along the circumference.
6" Test Cylinder Transport Rack
CA-0215
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 6x12 test cyliners with anchoring holes which allow rack to be secured to truck bed.
(4) options
Location: Tamping Rods for Concrete
Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.
(3) options
Location: Test Platens
Models available for testing 12” (305 mm) and 8” (203 mm) wide masonry units. . Both models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion...
Marshall Automatic Single Compactor, 4" Stationary Mold
AA-0020
Location: Marshall Automatic Compactor
The Marshall Automatic Compactor apparatus from Test Mark compacts samples at a preset number of hammer blows and shuts off on completion.
(6) options
Location: Beakers
Test Mark offers a variety of glass beakers as part of a complete line of soil testing equipment.
CA-0810
Location: Planeness/Thickness Gauges
Test Mark's magnifying crack comparator simply monitors cracks in concrete and masonry structures.
