Product Search
Search results for 'D-2041'
Showing 281 - 300 of 1648 Total Results
CA-4060-08
Location: Aggregate
3 oz. tin having a capacity of 85 +/- 5 ml, used to prepare working calcium chloride solution.
AA-0073
Location: Parts & Accessories
Features a digital display with a range of 0 to 1000 mm Hg. Accuracy range is + 0.5% of full scale capacity. 3/8" barbed fitting is used for quick connection. Operates on one 9V battery.
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2742
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 30 Gallon (114L) tank is 24" x 18" x 18" deep (610 x 457 x 457 mm). Maximum operating temperature is 140°F (60° C).
44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2744
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).
AA-0015
Location: Marshall Basic Compression Testing
The dial indicator consists of a maximum position brake assembly and guide sleeve. Accommodates 4" or 6" breaking heads. Graduations of 0.01" div., range 1.00"...
CA-2000-S
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Models with backing support cloth are also available.
No. 200 Wet Wash 12" x 4" with back up cloth
CA-2000-12F
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Backing cloth adds extra support.
(4) options
Location: Crack Monitors
Concrete crack monitors from Test Mark are simple, accurate devices for monitoring crack movement.
Modified Vicat for Masonry Mortars
CA-3120
Location: Vicat Apparatus
The Modified Vicat Apparatus determines the consistency and consistency retention of mortar used with brick and block applications.
AA-0040
Location: Marshall Hand Compaction Hammer
The Hand Compaction Hammer set from Test Mark Industries facilitates hand compaction of 4-inch samples.
Motorized Sieve Shaker, 8" & 12" Sieves
CA-1506
Location: Shakers, Economy
Motorized sieve shaker holds 11 full height or 19 half height 8" diameter sieves, or 7 full height, 11 intermediate height or 13 half height 12" diameter sieves. Supplied with a 30 minute timer and 1/4 hp motor.
CA-2900
Location: Cube Molds
Cement Cube Sand from Test Mark is used for preparing hydraulic cement mortars for 2-inch (51 mm) cube compression testing.
CA-1302
Location: Hot Plates
Durable die-cast single burner hot plate features high, medium, low and warm temperature settings. Power-on indicator light. Easy to use and clean.
Compass CX Series Compact Scale
Location: Parts & Accessories
Compass CX Series Compact Scale from Test Mark is lightweight and portable and suited for use in the lab for quality control and soil sampling.
CA-0287
Location: Cement
Metal retainer caps are used with the cube molding system. Sold in sets of 2. Compression pads are used with retainer caps in the cube molding system. Pads are molded for consistent shape and thickness. Sold in sets of 4 – red (80 duro) or 4 – clear (90 duro).
CA-4052
Location: Sand Equivalent
The mechanical motor-driven sand equivalent shaker from Test Mark is recommended for performing sand equivalent tests on a regular basis.
CA-4020
Location: Proportional Caliper
The proportional caliper from Test Mark is a timesaving device used for rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of .375" or larger.
(8) options
Location: Cylinder Molds - Plastic
Test Mark Industries features plastic concrete cylinder molds as part of a complete line of concrete testing equipment.
