Product Search
Search results for 'C-535'
Showing 301 - 320 of 1648 Total Results
Compaction Hammer, 10 lb. 18" drop
SA-0130
Location: Parts & Accessories
Compaction hammers are machined from steel and plated for rust resistance. 10 lb. (4.5 kg) hammer has a drop of 18" (457mm). 5.5 lb (2.54kg) compaction hammer has a drop of 12" (305mm). Guide sleeve has four vent holes in each end of sleeve to release built-up air pressure.
CA-0191-60
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results.
CA-0191-70
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Asphalt Dispenser, 4 Qt. (3.8 L)
AA-3000
Location: Asphalt Dispenser
Asphalt Dispenser features a round melting pot has stainless steel crucible & shell to facilitate easy clean up - from Test Mark Industries.
(3) options
Location: Spacers
Spacers are used to adjust the vertical testing height inside compression testing machine load frames when testing samples of various heights. Spacer mounts to the top cross head of the load frame. Spacer is manufactured from steel and is precision ground on both ends and painted for rust...
CA-4008
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Case of 75.
Prism Mold 2"x 2"x 10" - 2 gang
CA-2960
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
Prism Mold 1"x 1"x 10" - 2 gang
CA-2955
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
CA-4005
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Set of 3.
CA-1310
Location: Hot Plates
These durable hotplates are equipped with thermostatic temperature control. Baffle-vented welded stainless-steel case and cast-aluminum top for maximum heat transfer, strength and corrosion resistance.
(35) options
Location: Screen Trays
Test Mark provides a large variety of screen trays for aggregate testing. Easy to order online!.
SA-2017
Location: CBR Accessories
Perforated 5-7/8" (149mm) dia. base with adjustable stem. Contact end of the stem is easily locked in place with a knurled nut.
6" ( 152 mm) Cube Mold, Single
CA-0275
Location: Parts & Accessories
The single cavity cube mold from Test Mark is used for compression testing of concrete cubes or mortar samples.
SA-0650
Location: Mortar & Pestle
Soil mortar, when used with the pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior. Rubber-tipped pestle is 8" long and is for grinding soils without breaking individual particles.
AA-0040
Location: Marshall Hand Compaction Hammer
The Hand Compaction Hammer set from Test Mark Industries facilitates hand compaction of 4-inch samples.
Location: Concrete
Experts recommend the RH test as the most reliable in-depth measuring method for concrete moisture available today. The Blue Peg System measures relative humidity, temperature and dew point using a single microchip, factory calibrated to NIST standards. Each Blue Peg comes with a NIST traceable...
CA-0892
Location: Parts & Accessories
Experts recommend the RH test as the most reliable in-depth measuring method for concrete moisture available today. The Blue Peg System measures relative humidity, temperature and dew point using a single microchip, factory calibrated to NIST standards. Each Blue Peg comes with a NIST traceable...
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
SA-3500
Location: Mud Balance Testing
Mud Balances are used as standard procedure instruments for testing water and oil-base drilling fluids and oil well cements.
