Product Search
Search results for 'C91'
Showing 301 - 320 of 1123 Total Results
(3) options
Location: K-Type Digital Thermometer
Test Mark's pocket-sized thermometers accept Type K or J thermocouples with standard connectors, and provide accurate temperatures over an exceptionally wide range.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
CA-0880
Location: Stopwatch, Digital
Stopwatch has a large LCD display counts up to 24 hours, 59 minutes, 59 seconds. Unit has clock and calendar functions. Stopwatch comes with a detachable lanyard.
CA-1310
Location: Hot Plates
These durable hotplates are equipped with thermostatic temperature control. Baffle-vented welded stainless-steel case and cast-aluminum top for maximum heat transfer, strength and corrosion resistance.
SA-1300
Location: Probe Rod
The Steel Probe Rod from Test Mark is used for locating soft zones in and under compacted areas in sub-grades and footing excavations.
(41) options
Location: Air Meter Replacement Parts
Concrete air/pressure meter replacement parts are available from Test Mark. Use our diagram to find the part you need for easy online ordering.
SA-0340
Location: Resiliency Tester
The Resiliency Tester is used to test resiliency of hard rubber base of liquid limit machines, which should be done at 90-day intervals to ensure base is in compliance with ASTM Standards.
Location: Soils
Test Mark's COE Manual Compaction Hammer features a recoil mechanism in the foot assembly to reduce impact fatigue.
(2) options
Location: Compaction Hammers
Soil Compaction Hammers from Test Mark are machined from steel and plated for rust resistance. Easy online ordering.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
CA-0356-L
Location: Self-Consolidating Concrete
L-Box Flowability is a method used to determine flow rates and passibility of SCC in confined spaces. Available from Test Mark Industries.
SA-0665
Location: Hydrometer Jar Bath
Hydrometer Jar Bath from Test Mark Industries holds up to eight hydrometer jars at the same time.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
SA-3501
Location: Marsh Funnel
The Marsh Funnel provides quick measurements for reporting mud consistency. Fluid viscosity if the ratio of speed of the sample as it passes through the outlet tube (shear rate) to the amount of force (fluid weight) that is causing the fluid to flow (shear stress). Frequent reporting will show...
Test Mark Industries list of authorized dealers and locations for its construction materials testing products.
CA-2562
Location: Aggregate
The chute attachment replaces one pan to permit loading of material directly into a bag or container.
Compression Machine Mounting Stands
(2) options
Location: Compression Machine Mounting Stands
Compression Machine Mounting Stands are made of steel plate with the top plate and bottom flange parallel. Bolts and washers are included for securing the compression frame to the stand. Mounting stand elevates the compression machine 24.5” off the floor for the operator’s convenience & safety when...
(2) options
Location: Galvanized Pans
Galvanized material pans from Test Mark are used for performing concrete and aggregate test preparation.
