Product Search
Search results for 'T-304'
Showing 301 - 320 of 1124 Total Results
AA-0060
Location: Sample Ejector
Asphalt Sample Ejector from Test Mark is used for removing asphalt specimens from compaction molds.
CA-0935
Location: Specimen Curing
The curing tank circulator from Test Mark is a silent submersion pump with 120 GPH rating. Easy and secure online ordering.
(1) option
Location: Portable Scales
Test Mark pocket scales have a combination pan and cover that slides back for weighing and forward to cover the display and keys for storage or transport.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
(2) options
Location: Compaction Hammers
Soil Compaction Hammers from Test Mark are machined from steel and plated for rust resistance. Easy online ordering.
CA-1500
Location: Shakers, Gilson
Test Mark provides Gilson sieve shakers for 8-inch sieves. Easy ordering online.
CA-4060-11
Location: Aggregate
Used to irrigate the test specimen with working calcium chloride solution to flush clay-size particles from the sand.
CA-0280
Location: Cube Molds
The 2-inch (51 mm) diagonal arrangement three-gang bronze cube mold from Test Mark makes three test cubes at a time.
CA-0842
Location: Temperature/Humidity
Simultaneously displays both room and probe current temperature and humidity, with push button minimum/maximum memory recall function. Measuring range: Temperature 14 to 140 F (-10 to 60 C); Precision +/- 1.4 F (+/- .8 C) from 50 to 86 F (10 to 30 C), otherwise +/- 1.8 F (+/- 1 C). Humidity: 10 to...
Sieve, 8" dia., #270 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1876-08FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
CA-2860-01
Location: Concrete
Sturdy 3-legged painted steel stand is 20.5 in. high with adjustable neoprene rubber feet for leveling and isolation from vibration.
Highland Series Portable Precision Balance
(7) options
Location: Highland Series Portable Precision Balance
Balance has the following features: selectable weighing units of g, ct, lb, oz, d, GN, ozt, dwt, mom, TL, and mom, percentage weighing and below balance weighing functions, stainless steel pan, adjustable feet, low battery indicator and auto-power shut off, manual internal calibration with built in...
6" x 12" Cylinder Lifting Handle
CA-0216
Location: Cylinder Transport
The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 6" by 12" model.
4" x 8" Cylinder Lifting Handle
CA-0213
Location: Cylinder Transport
The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 4" by 8" model.
Cover Plate for Bronze Cube Mold
CA-0280-C
Location: Cement
Bronze cover plate with filling holes used with bronze cube mold for capping compound compressive strength testing.
CA-2965
Location: Comparator, Length Change
Gauge studs have stainless steel contact points for use with prism molds. Sold 10 per package. Part of our comparator/length change products.
CA-0289
Location: Grout Sample Box
The grout sample box from Test Mark features engineered-slotted corrugation which retains moisture while simulating CMU absorption rate.
(6) options
Location: Glass Thermometers
Test Mark provides glass thermometers, mercury or organic filled, as part of a complete line of materials testing equipment.
