Product Search
Search results for 'T-197'
Showing 341 - 360 of 1648 Total Results
CA-0358
Location: Self-Consolidating Concrete
The V-Funnel is used to measure flowability of fresh self-consolidating concrete. The funnel is filled and the time taken for it to flow through the apparatus is measured. A valve on the outflow port can be closed to allow SCC to settle, which indicates the tendency for segregation.
4" Test Cylinder Carrying Case
CA-0214
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 4x8 test cyliners for easier field to lab transfer with less specimen damage.
3 1/2" Grout Retainers, set of 2
CA-0289-01
Location: Parts & Accessories
Grout sample unbonded capping system for compression testing of grout specimens. Used in conjunction with grout sample box, the unbonded capping system provides tremendous labor savings, along with consistency and accuracy.
CA-0860
Location: Fire Proofing
Test Mark Industries provides this fire proofing depth gauge for measuring the thickness of sprayed fireproofing.
SA-0340
Location: Resiliency Tester
The Resiliency Tester is used to test resiliency of hard rubber base of liquid limit machines, which should be done at 90-day intervals to ensure base is in compliance with ASTM Standards.
CA-0600-12P
Location: Parts & Accessories
Strike-off bar. Plastic Roll-A-Meter Kit replacement parts.
Rhoma-Sol™ Specialty Emulsifier
AA-3128
Location: Emulsifier
Spray-on solution used to remove bituminous deposits and stains from test equipment, contains no hazardous petroleum solvents and is 100% biodegradable.
CA-3132
Location: Cement
Glass plate for use with all Vicat Apparatus is 4" x 4" x 3/16" (101.6 mm x 101.6 mm x 4.8 mm).
SA-2000
Location: CBR Load Frames
The CBR (California Bearing Ratio) loading press from Test Mark uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample.
Test Mark Industries supplies calibration and service locations for its construction testing equipment.
(6) options
Location: Beakers
Test Mark offers a variety of glass beakers as part of a complete line of soil testing equipment.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.
(3) options
Location: Round Pans/Mixing Bowl
Test Mark supplies round pans and mixing bowls for laboratory use in materials testing applications.
Sodium Hexametaphosphate, 1 lb.
SA-0590
Location: Parts & Accessories
Dispersing agent used in hydrometer analysis of soils. Supplied in 1 lb. or 10 lb. container Download MSDS Sheet.
Sodium Hexametaphosphate, 10 lb.
SA-0592
Location: Parts & Accessories
Dispersing agent used in hydrometer analysis of soils. Supplied in 10 lb. package.
Min-Max Thermometer DISCONTINUED
CA-0790
Location: Min/Max Thermometers
Test Mark's min-max thermometer indicates present temperature and the highest/lowest temperatures since last setting of markers.
CA-0600-05P
Location: Parts & Accessories
Meter bottom base. Plastic Roll-A-Meter Kit replacement parts.
Portable Precision Balance, 3000 g x 0.1 g
SC-0190
Location: Parts & Accessories
The Portable Precision Balance from Test Mark features selectable weighing units, percentage weighing and below balance weighing functions, stainless steel pan, adjustable feet, low battery indicator and auto-power shut off, manual internal calibration with built in mass, RS-232 and USB interface,...
Portable Precision Balance, 6000 g x 0.1 g
SC-0195
Location: Parts & Accessories
The Portable Precision Balance from Test Mark features selectable weighing units, percentage weighing and below balance weighing functions, stainless steel pan, adjustable feet, low battery indicator and auto-power shut off, manual internal calibration with built in mass, RS-232 and USB interface,...
