Product Search
Search results for 'T158'
Showing 361 - 380 of 1124 Total Results
(4) options
Location: Centrifuge Extractors for Asphalt
Centrifuge Extractors from Test Mark are designed for use in the separation of asphaltic mixtures to determine bitumen percentage.
CA-0710-01
Location: Concrete
Replacement wash bottle used to insert alcohol into Chase air indicator.
(12) options
Location: Piston & Cylinder Seals
Piston and Cylinder Seals for compression machines. Please check your model number for the correct seals.
CA-0842
Location: Temperature/Humidity
Simultaneously displays both room and probe current temperature and humidity, with push button minimum/maximum memory recall function. Measuring range: Temperature 14 to 140 F (-10 to 60 C); Precision +/- 1.4 F (+/- .8 C) from 50 to 86 F (10 to 30 C), otherwise +/- 1.8 F (+/- 1 C). Humidity: 10 to...
CA-2730
Location: Specific Gravity Bench
The density basket from Test Mark is used to determine bulk specific gravity and absorption of coarse aggregates.
AA-0040
Location: Marshall Hand Compaction Hammer
The Hand Compaction Hammer set from Test Mark Industries facilitates hand compaction of 4-inch samples.
CA-0350
Location: Brushes
Test Mark provides stiff wire brushes for lab and field use in materials testing applications.
Perpendicular Verification Device
(3) options
Location: Verification Device
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
SA-0651
Location: Mortar & Pestle
Soil Mortar, when used with the rubber tipped pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior.
Exhaust Chamber for Bench Oven
CA-1425-04
Location: Ovens & Hot Plates
Exhaust chamber adapter is available for processing material where undesirable fumes are present. Encloses the oven exhaust and allows venting into a standard 3" (76 mm) stove pipe.
(1) option
Location: Carrier Brackets for Masonry Platen
Easier and safer mounting of Block Platen.. The Carrier Bracket is used for safer removal and mounting of the block platen assembly inside the load frame, and should be considered a must have option when testing masonry units. The brackets heavy duty arm is mounted on the rear left hand corner of...
SA-2013
Location: CBR Accessories
CBR Penetration Piston has 3 sq. in. (19.35cm2) base area and is about 7-1/2" (191mm) long. Designed for use in conjunction with weights to apply penetration surcharge loads.
CA-3130
Location: Vicat Apparatus
Used with CA-3110 Modified Vicat Apparatus for false set determination, mold is 2" x 2" x 6" (50mm x 50 mm x 150mm). Overall length including base is 9 ΒΌ" (240 mm).
Floating Thermometer DISCONTINUED
CA-0792
Location: Parts & Accessories
Test Mark Industries supplies floating thermometers as part of a complete line of construction materials testing equipment.
SA-3501
Location: Marsh Funnel
The Marsh Funnel provides quick measurements for reporting mud consistency. Fluid viscosity if the ratio of speed of the sample as it passes through the outlet tube (shear rate) to the amount of force (fluid weight) that is causing the fluid to flow (shear stress). Frequent reporting will show...
CA-2980-03
Location: Aggregate
Chart has five permanent reference colors mounted in a durable protective plastic case.