Product Search
Search results for 'C-531'
Showing 381 - 400 of 1124 Total Results
MA-0135
Location: Concrete Cylinder Loading Shelf, CM-2500 Series
Easier loading of 6” cylinders in CM-2500 series machines.. This optional shelf was designed to make loading and positioning of 6” (152 mm) cylinders with pad cap rings both easier and safer in a CM-2500 series machine. The shelf features a heavy-duty steel design with a plastic laminated top, so...
(1) option
Location: Portable Scales
Test Mark pocket scales have a combination pan and cover that slides back for weighing and forward to cover the display and keys for storage or transport.
AA-0032
Location: Asphalt
This pedestal stabilizes molds during compaction. 8 x 8 x 18" wooden post capped with a 12 x 12 x 1" steel plate. Mounts to a concrete slab with four angle brackets.
(3) options
Location: Glass Filter Flask
Filter flasks from Test Mark feature a heavy wall filter flask with hose connection and silicone stopper.
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
CA-0890
Location: Sling Psychrometer
The Sling Psychrometer from Test Mark determines relative humidity with a matched pair of organic filled 20-120° F x 1° thermometers to measure wet and dry bulb temperatures.
Location: Soils
Test Mark's COE Manual Compaction Hammer features a recoil mechanism in the foot assembly to reduce impact fatigue.
CA-1460
Location: Gloves
Rubber gloves from Test Mark provide excellent protection when removing concrete cylinders or asphalt samples from curing tanks or water baths.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.
(4) options
Location: Melting Pots
Melting posts from Test Mark rapidly and efficiently melt capping compound and perform other routine melting operations.
CA-2910
Location: Cube Molds
Tensile sand from Test Mark Industries is specially graded natural silica sand to pass a No. 20 (850 um) sieve.
SA-1302
Location: Probe Rod
For protection against possible electrical shock when working around buried electrical lines. T-handle has high density nylon cover. Shaft is 1/2" dia. x 48" long, steel tip measures 5/8" x 3/4". NOTE: Because size and weight will vary with quantities ordered, we have reserved the freight charges...
SA-0200
Location: Sand Density
The Sand Cone Density Apparatus from Test Mark Industries determines the in-place density of soils.
