Product Search
Search results for 'T245'
Showing 461 - 480 of 1648 Total Results
Voluvessel, 1/20 cu ft capacity
SA-1400
Location: Voluvessel
The Voluvessel from Test Mark is a direct reading instrument that is easily used and requires no calibration. A liquid filled balloon measures hole volume after removal of soil sample.
5.5 lb. Corp. of Engineers Hammer
SA-0125
Location: Parts & Accessories
Manual compaction hammers have a 5.5 lb. (2.54 kg) or 10 lb. (5.08 kg) weight with a drop of 12" (305 mm) and a 2" (50.8 mm) face. Hammer is guided on a shaft. The foot assembly has a recoil mechanism to reduce impact fatigue. Tamping face is removable and replaceable.
CA-0470
Location: Rubber Mallet
The rubber mallet from Test Mark is used to consolidate materials and release entrapped air in concrete molds, air meters, slump cones and unit weight buckets.
Compaction Permeameter, 4"W x 4"D x 12"H (102 x 102 x 305 mm)
SA-1180
Location: Parts & Accessories
For determining permeability of clay, sand, and gravel soils, this unit uses the Proctor plasticity compaction method. Two-piece cylindrical mold includes upper plate with valve, water inlet/outlet, filter base plate and filter stones.
CA-3210
Location: Water/Cement Ratio
The Cementometer is used for rapid determination of the moisture content of fresh cement and concrete, available from Test Mark Industries.
CA-0217
Location: Cylinder Transport
The steel concrete cylinder carrier from Test Mark is used for carrying 6-inch dia. cylinders in the field or lab.
(5) options
Location: Yield Buckets
Steel yield buckets from Test Mark are used for determining the unit weight of aggregate for concrete.
Portable Precision Balance, 2200 g x 0.01 g
SC-0196
Location: Parts & Accessories
he Portable Precision Balance from Test Mark features selectable weighing units, percentage weighing and below balance weighing functions, stainless steel pan, adjustable feet, low battery indicator and auto-power shut off, manual internal calibration with built in mass, RS-232 and USB interface,...
(4) options
Location: Beam Molds
Steel Concrete Beam Molds from Test Mark are used for molding third or center point test samples.
SC-1400 Series Industrial Balance
Location: GP Series Industrial Swing Arm Balance
SC-1400 Series Industrial Balance features swing arm type display, internal calibration, below balance weighing with optional under-hook, auto power off, AC adapter.
Test Mark Industries list of authorized dealers and locations for its construction materials testing products.
Modified Vicat for Masonry Mortars
CA-3120
Location: Vicat Apparatus
The Modified Vicat Apparatus determines the consistency and consistency retention of mortar used with brick and block applications.
CA-2473
Location: Parts & Accessories
Special dustpans have extra capacity for collecting and handling fines.
Proctor Mold 4", Volumn 1/30 cf.
SA-0100
Location: Parts & Accessories
Molds are manufactured from steel with all parts plated for longer life. Wing nuts mount on both sides of collar for easy assembly and stripping.
S.S. Pan 9 1/2 x 11 7/8 x 2 1/2
CA-2605
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
S.S. Pan 6 3/8" x 10 3/8" x 2 1/2"
CA-2610
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
CA-2965
Location: Comparator, Length Change
Gauge studs have stainless steel contact points for use with prism molds. Sold 10 per package. Part of our comparator/length change products.
CA-2000-S
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Models with backing support cloth are also available.
No. 200 Wet Wash 8" x 4" with back up cloth
CA-2002
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Backing cloth adds extra support.
No. 200 Wet Wash 12" x 4" with back up cloth
CA-2000-12F
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Backing cloth adds extra support.
