Product Search
Search results for 'T-164'
Showing 501 - 520 of 1124 Total Results
CA-2980-01
Location: Aggregate
8 oz. test bottles are graduated in oz. and ml and have watertight screw-on caps.
Rhoma-Sol™ Specialty Emulsifier
AA-3128
Location: Emulsifier
Spray-on solution used to remove bituminous deposits and stains from test equipment, contains no hazardous petroleum solvents and is 100% biodegradable.
(4) options
Location: Tamping Rods for Concrete
Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.
Cube Molding Retainers and Pads
(3) options
Location: Cube Retainers and Pads
Cube retainers and pads are used with retainer caps in the cube molding system; pads are molded for consistent shape and thickness - from Test Mark.
CA-0217
Location: Cylinder Transport
The steel concrete cylinder carrier from Test Mark is used for carrying 6-inch dia. cylinders in the field or lab.
CA-1450
Location: Gloves
Test Mark's heat resistant gloves are used for handling heated items when conducting laboratory work with ovens or hot plates.
Bench Scale, 16 lbs. x 0.0002 lbs. (8000 g x 0.1 g)
SC-0122-A
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)
SC-0124
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
4" Test Cylinder Carrying Case
CA-0214
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 4x8 test cyliners for easier field to lab transfer with less specimen damage.
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
SA-1000
Location: Preparation Tools
The preparation knife from Test Mark Industries is used for sample preparation and general lab work.
Copper Condenser w/inlet, outlet tubes
AA-1004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-1004; Test Mark Industries.
Copper Condenser w/inlet, outlet tubes
AA-2004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-2004; Test Mark Industries.
CA-0810
Location: Planeness/Thickness Gauges
Test Mark's magnifying crack comparator simply monitors cracks in concrete and masonry structures.
(3) options
Location: Platform Scales
Digital Platform Scales from Test Mark feature high resolution, two selectable weighing units of lb or kg, a 12-inch x 15-inch stainless steel platform and leveling feet with bubble indicator.
Sieve, 12" dia., #8 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1750-12FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
Sieve, 12" dia., #8 Mesh, Half Height, Brass Frame, Brass Mesh
CA-1750-12HB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
Sieve, 12" dia., #10 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1760-12FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
