Product Search
Search results for 'T-197'
Showing 521 - 540 of 1648 Total Results
Screen Shaker Manual Clamping **DISCONTINUED**
CA-2151
Location: Shakers
Test Mark supplies screen shaker manual clamping for the aggregate testing industry.
CA-0238
Location: Parts & Accessories
These pi-tape gauges are ideal for measuring the diameter of concrete cylinders, soil, and asphalt samples. One reading provides a direct reading of average diameter of both round or out-of-round cylinders and cores. Guaranteed to provide +/- .001" (.03 mm) accuracy. Includes certificate of...
CA-0238-M
Location: Parts & Accessories
These pi-tape gauges are ideal for measuring the diameter of concrete cylinders, soil, and asphalt samples. One reading provides a direct reading of average diameter of both round or out-of-round cylinders and cores. Guaranteed to provide +/- .001" accuracy. Includes certificate of calibration.
CA-2700
Location: Specific Gravity Flasks
The Chapman flask from Test Mark has two bulbs for determining approximate percentage of voids and surface moisture in fine aggregates.
CA-0234
Location: Parts & Accessories
Cylinder wraps are made of canvas nylon with velcro strips. Use these wraps around your concrete test cylinder to help minimize debris from shattering during compression testing. Product is 4" by 8".
(2) options
Location: Canvas Wraps
Neoprene pad inserts from Test Mark are made from a tough elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results.
CA-2585
Location: Rebar Electronic Metal Detector
Test Mark's hand-held electronic metal detector locates rebars, metal pipe and conduit through concrete up to depths of 6 inches.
AA-0013
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 6" model.
Perpendicular Verification Device
(3) options
Location: Verification Device
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
(2) options
Location: Surface Thermometer
Surface thermometers from Test Mark put the sensing element into direct contact with the surface to measure the temperature.
(3) options
Location: Vapor Emissions Test Kit
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations.
MA-1101
Location: Machine Accessory Lift
The machine accessory lift can raise 1,100 pounds easily with a detachable metal handle - changing out breaking heads or adding spacers is quick and easy.
Digital Platform Scale, 60 lbs. x 0.005 lb. (30 kg x 0.002 kg)
SC-0300-N
Location: Parts & Accessories
These rugged scales feature high resolution, two selectable weighing units of lb or kg, a 12" x 15" stainless steel platform and leveling feet with bubble indicator. They are powered by an AC adapter included or four C size batteries with up to 150 hours of working time, and have a low better power...
Digital Platform Scale, 150 lbs. x 0.01 lb. (60 kg x 0.005 kg)
SC-0310-N
Location: Parts & Accessories
These rugged scales feature high resolution, two selectable weighing units of lb or kg, a 12" x 15" stainless steel platform and leveling feet with bubble indicator. They are powered by an AC adapter included or four C size batteries with up to 150 hours of working time, and have a low better power...
Digital Platform Scale, 300 lbs. x 0.1 lb. (150 kg x 0.05 kg)
SC-0321-N
Location: Parts & Accessories
These rugged scales feature high resolution, two selectable weighing units of lb or kg, a 12" x 15" stainless steel platform and leveling feet with bubble indicator. They are powered by an AC adapter included or four C size batteries with up to 150 hours of working time, and have a low better power...
SA-0113-05
Location: Parts & Accessories
Adapter kit for the sample ejector for 2" diameter samples.
SA-0113-06
Location: Parts & Accessories
Adapter Kit for Sample Ejector for 3" diameter samples.
CA-1202
Location: Parts & Accessories
Concrete crack monitors provide a simple, accurate method for monitoring crack movement. Monitor features stamped crosshairs and grid with two acrylic plates which move independently. Each crack monitor comes with a graph for periodic recording of movement. Monitors may be installed using Quick-set...
