Product Search
Search results for 'C-117'
Showing 561 - 580 of 1648 Total Results
SA-0362-01
Location: Soils
Special adhesive backed absorbent paper that adds no fiber to soil samples. Sold 50 sheets per package.
Prism Mold 3"x 3"x 10" - 1 gang
CA-2962
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Application: volume change of cement paste,...
SA-0660
Location: Parts & Accessories
Plain form hydrometer has an approximate length of 280 mm. The ASTM 151H is graduated with a range of 0.0995 to 1.038 in 0.001 divisions at 68° F for specific gravity. The ASTM 152H has a range of -5 to +60 grams in 1 gram divisions at 68° F for grams of soil colloids per liter. Hydrometer jars are...
CA-0236
Location: Micrometer
This concrete micrometer was designed to accurately measure the diameter of concrete cylinders with a range of 5.5 - 6.5in.
CA-0880
Location: Stopwatch, Digital
Stopwatch has a large LCD display counts up to 24 hours, 59 minutes, 59 seconds. Unit has clock and calendar functions. Stopwatch comes with a detachable lanyard.
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
CA-1500
Location: Shakers, Gilson
Test Mark provides Gilson sieve shakers for 8-inch sieves. Easy ordering online.
6" Test Cylinder Transport Rack
CA-0215
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 6x12 test cyliners with anchoring holes which allow rack to be secured to truck bed.
Prism Mold 4"x 4"x 10" - 1 gang
CA-2964
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Application: volume change tests.
Sieve, 12" dia., 4" Mesh, Half Height, Brass Frame, Stainless Mesh
CA-1580-12HS
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8".
Spacers for CM-0030 and CM-2500 series
(4) options
Location: Spacers
Spacers are used with test platens to adjust the vertical working clearance height inside a machines load frame, for testing samples of various types and sizes to prevent over-extension of the load frames piston. They are manufactured from steel and machined plane on both ends to maintain a...
CA-0191
Location: Parts & Accessories
Our pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set. These neoprene pad inserts are made from a tough...
CA-0191-50
Location: Parts & Accessories
Our pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set. These neoprene pad inserts are made from a tough...
Compact Portable Balance, 1500 g x 0.1 g
SC-0182
Location: Parts & Accessories
Balances feature: selectable weighing units, stainless steel pan, low battery indicator, battery saving auto-power shut off, push button calibration using external mass, plastic draft shield and AC adapter. Optional hard carrying case for field use.
Compact Portable Balance, 2600 g x 0.1 g
SC-0183
Location: Parts & Accessories
Balances feature; selectable weighing units, stainless steel pan, low battery indicator, battery saving auto-power shut off, push button calibration using external mass, plastic draft shield and AC adapter. Optional hard carrying case for field use.
CA-4030-01
Location: Aggregate
Cylindrical measure has a locating hole to fit a lug on the funnel stand to ensure each sample is tested with precision and repeatability.
CA-4009
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Case of 75.
