Product Search
Search results for 'C-805'
Showing 561 - 580 of 1648 Total Results
CA-2182
Location: Parts & Accessories
12" dia. brass pan with drain. Vinyl tubing may be used to connect pan to drain if desired.
CA-4060-05
Location: Aggregate
Siphon assembly used for flow of working calcium chloride solution through the irrigator tube.
CA-4060-08
Location: Aggregate
3 oz. tin having a capacity of 85 +/- 5 ml, used to prepare working calcium chloride solution.
Drierite Dessicant, 1 lb. white
AA-0124
Location: Drierite
Protects vacuum pump by removing final trace of moisture. Must be used with blue indicating drierite.
SA-0112
Location: Asphalt
Mold Extractor is used with compression tester for removing 4" compaction mold specimens.
CA-0280-L
Location: Cube Molds
Polypropylene water tight disposable liners used with cube maker system. Sold 200 per carton.
CA-3130
Location: Vicat Apparatus
Used with CA-3110 Modified Vicat Apparatus for false set determination, mold is 2" x 2" x 6" (50mm x 50 mm x 150mm). Overall length including base is 9 ¼" (240 mm).
Aluminum Strike-Off Bar - 18” x 2” x 1/8” thick
CA-0440
Location: Concrete
Used for striking-off samples in containers, measures or molds. Dimensions 18" long x 2" wide x 1/8" thick.
CA-2861
Location: Concrete
1/2" ID discharge tube orifice is used with grouts having 35 seconds or less efflux time.
CA-2862
Location: Concrete
Special 3/4" orifice is used with thick grouts with efflux time of more than 35 seconds.
CA-2910
Location: Cube Molds
Tensile sand from Test Mark Industries is specially graded natural silica sand to pass a No. 20 (850 um) sieve.
(5) options
Location: Shelby Tubes
Shelby Tubes from Test mark feature a chamfered end that forms a cutting edge, and includes holes for securing tubes to a drive head.
AA-0060
Location: Sample Ejector
Asphalt Sample Ejector from Test Mark is used for removing asphalt specimens from compaction molds.
CA-1510
Location: Shakers, Gilson
Test Mark provides Gilson sieve shakers for 8-inch and 12-inch sieves.
10 ml Graduated Plastic Cylinder
SA-0709-P
Location: Parts & Accessories
Polypropylene graduated cylinders have a single scale with raised numerals for easy reading. Flared top rim and large spout facilitates pouring and hexagon shaped base provides stability. Chemically resistant and autoclavable at 121° C (250° F). Translucent. NOTE: Orders of 10 or more cylinders...
