Product Search
Search results for 'C-117'
Showing 581 - 600 of 1648 Total Results
Sieve, 12" dia., #14 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1775-12FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
Sieve, 12" dia., #16 Mesh, Full Height, Brass Frame, Brass Mesh
CA-1780-12FB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 4 1/4", Intermediate 3", Half 2 5/8" Depth to cloth - Full 3 1/4", Intermediate 2", Half 1 5/8" FS - Full height, stainless steel mesh IS - Intermediate height, stainless steel mesh HS -...
CA-0191
Location: Parts & Accessories
Our pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set. These neoprene pad inserts are made from a tough...
CA-0191-50
Location: Parts & Accessories
Our pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set. These neoprene pad inserts are made from a tough...
CA-4030-01
Location: Aggregate
Cylindrical measure has a locating hole to fit a lug on the funnel stand to ensure each sample is tested with precision and repeatability.
Compact Portable Balance, 1500 g x 0.1 g
SC-0182
Location: Parts & Accessories
Balances feature: selectable weighing units, stainless steel pan, low battery indicator, battery saving auto-power shut off, push button calibration using external mass, plastic draft shield and AC adapter. Optional hard carrying case for field use.
Compact Portable Balance, 2600 g x 0.1 g
SC-0183
Location: Parts & Accessories
Balances feature; selectable weighing units, stainless steel pan, low battery indicator, battery saving auto-power shut off, push button calibration using external mass, plastic draft shield and AC adapter. Optional hard carrying case for field use.
CA-4009
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Case of 75.
CA-4020
Location: Proportional Caliper
The proportional caliper from Test Mark is a timesaving device used for rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of .375" or larger.
(3) options
Location: Wash Bottles
Test Mark Industries supplies wash bottles as part of a complete line of soil testing equipment and supplies.
CA-0200
Location: Parts & Accessories
These pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set.
CA-0203
Location: Parts & Accessories
These pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set.
CA-0202
Location: Parts & Accessories
These pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set.
CA-2050
Location: Sieve Brushes
The Wire Sieve Brush from Test mark features a steel wire with loop handle for cleaning coarse series sieves.
(4) options
Location: Cylinder Molds - Steel
Test Mark Industries features steel concrete cylinder molds as part of a complete line of concrete testing equipment.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers.. The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel with...
SA-0240
Location: Soil Pocket Penetrometer
The Soil Pocket Penetrometer from Test Mark is used for the evaluation and classification of cohesive soils in terms of soil consistency.
CA-1580-08FS
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1".
(4) options
Location: Moisture Boxes
Test Mark provides aluminum moisture boxes that protect the sample from exposure during weighing operations.
Aluminum Moisture Box, 2" (51 mm) dia. x 7/8" (22 mm) H
SA-0390
Location: Parts & Accessories
Test Mark provides aluminum moisture boxes that protect the sample from exposure during weighing operations. 2" (51 mm) dia. x 7/8" (22 mm) H model.
