Product Search
Search results for 'D-2217'
Showing 601 - 620 of 1644 Total Results
Material Handling Pan, 12" x 20.5" x 4" deep (305 x 521 x 102mm)
CA-2485
Location: Parts & Accessories
Steel handling pans have a chute end and swing down handles to permit oven access. 12" x 20.5" x 4" deep model.
CA-2471
Location: Parts & Accessories
Special dustpans have extra capacity for collecting and handling fines.
CA-2473
Location: Parts & Accessories
Special dustpans have extra capacity for collecting and handling fines.
30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2742
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 30 Gallon (114L) tank is 24" x 18" x 18" deep (610 x 457 x 457 mm). Maximum operating temperature is 140°F (60° C).
44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)
CA-2744
Location: Parts & Accessories
Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).
CA-2700
Location: Specific Gravity Flasks
The Chapman flask from Test Mark has two bulbs for determining approximate percentage of voids and surface moisture in fine aggregates.
CA-4060-01
Location: Aggregate
Plastic measuring cylinders are 17 in. high, 1 1/4" inside diameter and are graduated from 0 - 15 in. by 0.1 in. graduations from bottom of cylinder.
CA-4030-01
Location: Aggregate
Cylindrical measure has a locating hole to fit a lug on the funnel stand to ensure each sample is tested with precision and repeatability.
Asphalt Dispenser, 4 Qt. (3.8 L)
AA-3000
Location: Asphalt Dispenser
Asphalt Dispenser features a round melting pot has stainless steel crucible & shell to facilitate easy clean up - from Test Mark Industries.
Indicating Drierite, 1 lb., Blue
AA-0122
Location: Drierite
Blue dessicant turns red to show absorption and may be reused. One of our Drierite products.
Copper Condenser w/inlet, outlet tubes
AA-1004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-1004; Test Mark Industries.
Copper Condenser w/inlet, outlet tubes
AA-2004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-2004; Test Mark Industries.
CA-0285
Location: Cube Molds
The Econ-O-Cube mold from Test Mark forms three 2-inch cubes at one time in a diagonal arrangement. Easy and secure online ordering.
CA-0286
Location: Cube Molds
The 2-inch cube maker molding system from Test Mark uses watertight polypropylene liners which fit into a 3-gang metal mold frame.
Plastic Beam Mold 6" x 6" x 21"
CA-0340
Location: Plastic Beam Molds
Test Mark's durable, lightweight plastic beam mold uses simple thumbscrews for easy stripping, cleaning, and assembly.
CA-0289
Location: Grout Sample Box
The grout sample box from Test Mark features engineered-slotted corrugation which retains moisture while simulating CMU absorption rate.
(3) options
Location: Vapor Emissions Test Kit
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations.
Vapor Emission Test Kit , 12 per pkg.
CA-2595
Location: Parts & Accessories
This vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations. Kit consists of a calcium chloride container, plastic dome cover with seal, pH test kit, and step-by step instructions. Three kits...
Vapor Emission Test Kit, 3 per pkg.
CA-2594
Location: Parts & Accessories
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations. Product has three per package.
(4) options
Location: Cylinder Molds - Steel
Test Mark Industries features steel concrete cylinder molds as part of a complete line of concrete testing equipment.
