Product Search
Search results for 'D2726'
Showing 1141 - 1160 of 1648 Total Results
Sieve, 12" dia., #400 Mesh, Half Height, Stainless Frame, Stainless Mesh
CA-1885-12HSS
Location: Parts & Accessories
SA-0210
Location: Sand Density
The Density Plate provides a flat, stable base for the sand cone apparatus - available from Test Mark Industries.
3¼" Standard Hand Auger Assembly
SA-1201
Location: Parts & Accessories
Hand augers with quick connectors feature heavy gauge, heat treated carbon steel bucket with cupped blades to facilitate hole advancement. Auger head, extensions and T-handle are zinc electroplated for rust resistance.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
Prism Mold 2"x 2"x 10" - 2 gang
CA-2960
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
Prism Mold 1"x 1"x 10" - 2 gang
CA-2955
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
CA-1202
Location: Parts & Accessories
Concrete crack monitors provide a simple, accurate method for monitoring crack movement. Monitor features stamped crosshairs and grid with two acrylic plates which move independently. Each crack monitor comes with a graph for periodic recording of movement. Monitors may be installed using Quick-set...
CA-0241
Location: Parts & Accessories
Dial caliper features a 6" measuring range with .001" graduations and .100" per revolution. Hardened and ground stainless steel main beam with hardened, ground and lapped measuring faces. Jaw depth is 1.5".
AA-0060
Location: Sample Ejector
Asphalt Sample Ejector from Test Mark is used for removing asphalt specimens from compaction molds.
SA-0340
Location: Resiliency Tester
The Resiliency Tester is used to test resiliency of hard rubber base of liquid limit machines, which should be done at 90-day intervals to ensure base is in compliance with ASTM Standards.
SA-0718
Location: Parts & Accessories
Clear glass volumetric flasks are fitted with a ground glass stopper and are accurately calibrated for reliable measuring of liquids and solutions. The neck has a single ring graduation mark.
CA-1302
Location: Hot Plates
Durable die-cast single burner hot plate features high, medium, low and warm temperature settings. Power-on indicator light. Easy to use and clean.
(41) options
Location: Air Meter Replacement Parts
Concrete air/pressure meter replacement parts are available from Test Mark. Use our diagram to find the part you need for easy online ordering.
CA-0203-50
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results. Pads are molded for a consistent thickness and diameter. Sold individually.
CA-0203-60
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results. Pads are molded for a consistent thickness and diameter.
CA-0203-70
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results. Pads are molded for a consistent thickness and diameter.
CA-0202-01
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results. Pads are molded for a consistent thickness and diameter. Sold individually.
CA-0202-60
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results. Pads are molded for a consistent thickness and diameter.
CA-0202-70
Location: Parts & Accessories
These neoprene pad inserts are made from a tough Elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results. Pads are molded for a consistent thickness and diameter.
