Product Search
Search results for 'C-403'
Showing 121 - 140 of 1648 Total Results
(7) options
Location: Graduated Cylinders
Polypropylene graduated cylinders from Test Mark have a single scale with raised numerals for easy reading.
Marshall Automatic Double Compactor, 4" Rotating Mold
AA-0022
Location: Marshall Automatic Compactor
Automatically compacts two samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
Marshall Automatic Triple Compactor, 4" Rotating Mold
AA-0024
Location: Marshall Automatic Compactor
Automatically compacts three samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
CA-1990
Location: Wet Washing Spray Apparatus
Test Mark's Wet Wash Spray Apparatus consists of a valve, pressure gauge, piping and spray nozzle.
SA-0665
Location: Hydrometer Jar Bath
Hydrometer Jar Bath from Test Mark Industries holds up to eight hydrometer jars at the same time.
SC-8300
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weight set includes a Statement of Accuracy from the manufacturer or an NIST Traceable Certificate. Stainless steel weights 5000 g thru 200 g are 2 piece construction with a groove near the top for easier handling. Weights 100 g and below are 1 piece construction...
Cylinder Platen, 6 ½” Diameter
(3) options
Location: Test Platens
Free floating bearing platen seats under test pressure.. Used when testing 6” (152 mm) or 4” (101 mm) diameter concrete cylinders in compression. Platen is manufactured from steel with all components plated for corrosion resistance. Upper cylinder platen used when testing 6” (152 mm) or 4” (101 mm)...
Pad Caps and Retainer Rings - Steel
(16) options
Location: Unbonded Capping (Retainers and Pad Caps)
Pad caps and retainer rings are available from Test Mark as part of a complete line of concrete testing equipment and supplies.
Concrete Beam Tester, 18" Span, 3rd Point
CA-0343
Location: Parts & Accessories
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6" x 6" cross-section beams. Hydraulically driven unit retains maximum reading to eliminate lost data. Gauge resets to zero for repeat tests. Lightweight aluminum unit has dual...
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
6" x 12" (152 x 305 mm) Steel Mold with Handle
CA-0250-H
Location: Parts & Accessories
Manufactured from .25" (6.3 mm) thick seamless steel pipe for durability, body is longitudinally split so mold will spring open when unclamped. All parts plated for corrosion resistance and longer life. Detachable base plate included NOTE: Shipping may vary due to size and weight of this item.
3" x 6" (76 x 152 mm) Steel Mold
CA-0270
Location: Parts & Accessories
Manufactured from .25" (6.3 mm) thick seamless steel pipe for durability, body is longitudinally split so mold will spring open when unclamped. All parts plated for corrosion resistance and longer life. Detachable base plate included NOTE: Shipping may vary due to size and weight of this item.
SA-0354-S
Location: Shrinkage Limit Set
The Shrinkage Limit Set from Test Mark is part of a complete line of soil testing equipment. Easy online ordering.
CA-3125
Location: Vicat Apparatus
The Plastic Conical Mold from Test Mark is used with all Vicat Apparatus as part of a complete cement testing solution.
Prism Mold 2"x 2"x 10" - 2 gang
CA-2960
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
Prism Mold 1"x 1"x 10" - 2 gang
CA-2955
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Applications include: autoclave expansion of...
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
CA-3000
Location: Flow Tables
Hand driven flow tables are used to determine consistency of cement mortars. A test specimen is molded on the table to a specified volume and shape.
CA-0360
Location: Slump Testing
Slump cones from Test Mark Industries determine the slump of concrete in the laboratory or field. Easy and secure online ordering.
(2) options
Location: Sample Bags
Plastic-lined sample bags from Test Mark are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory.
