Product Search
Search results for 'C1176'
Showing 141 - 160 of 1124 Total Results
SA-2000
Location: CBR Load Frames
The CBR (California Bearing Ratio) loading press from Test Mark uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
CA-1430
Location: Bench Ovens
These bench ovens are used for curing, drying, and baking. Ovens feature high density insulation for reduced heat loss and efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 7.0 cu. ft., 300ºF model.
(2) options
Location: Flow Cones
The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
CA-1420
Location: Bench Ovens
These bench ovens are used for curing, drying, baking. Ovens feature high density insulation for reduced heat loss and efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 7.0 cu. ft., 437ºF model.
Bench Oven, 10.6 cu. ft. 437ºF
CA-1440
Location: Bench Ovens
These bench ovens are used for curing, drying, and baking. Ovens feature high density insulation for reduced heat loss efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 10.6 cu. ft. model.
CA-4005
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Set of 3.
Voluvessel, 1/20 cu ft capacity
SA-1400
Location: Voluvessel
The Voluvessel from Test Mark is a direct reading instrument that is easily used and requires no calibration. A liquid filled balloon measures hole volume after removal of soil sample.
High Strength Capping Compound
CA-0100-HS
Location: Capping Compound
Test Mark's High Strength Capping Compound is easily melted, pours smoothly, has a high compressive strength, and gives consistent test results.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
CA-0600-P
Location: Air Entrainment/Roll-A-Meter
The PVC and fiberglass reinforced Roll-A-Meter from Test Mark measures entrained air in any type of concrete, including lightweight mixes.
(4) options
Location: Cylinder Molds - Steel
Test Mark Industries features steel concrete cylinder molds as part of a complete line of concrete testing equipment.
CA-0600-01P
Location: Parts & Accessories
Top expansion plug. Plastic Roll-A-Meter Kit replacement parts.
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers.. The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel with...
(2) options
Location: Hydrometers
Hydrometer jars from Test Mark are used to suspend soil hydrometers in sodium hexametaphosphate solution for determining the amount of soil particles in a dispersed suspension.
AA-0060
Location: Sample Ejector
Asphalt Sample Ejector from Test Mark is used for removing asphalt specimens from compaction molds.
Wire Cloth Field Rocker Screen Set
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
