Product Search
Search results for 'T85'
Showing 141 - 160 of 1124 Total Results
Density Drive Sampler, 3" ( 76.2 mm)
SA-1355
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 3" model.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
(2) options
Location: Surface Thermometer
Surface thermometers from Test Mark put the sensing element into direct contact with the surface to measure the temperature.
SA-2013
Location: CBR Accessories
CBR Penetration Piston has 3 sq. in. (19.35cm2) base area and is about 7-1/2" (191mm) long. Designed for use in conjunction with weights to apply penetration surcharge loads.
CA-3100
Location: Vicat Apparatus
The Vicat Consistency Apparatus is part of a complete line of cement testing equipment from Test Mark Industries.
Spacers for CM-0030 and CM-2500 series
(4) options
Location: Spacers
Spacers are used with test platens to adjust the vertical working clearance height inside a machines load frame, for testing samples of various types and sizes to prevent over-extension of the load frames piston. They are manufactured from steel and machined plane on both ends to maintain a...
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
SC-0065
Location: Scales
This Stainless Steel Scoop is used to contain liquid or powder material being weighed on Triple Beam Balance. The stainless steel construction is ideal for weighing hot mix material with a convenient spout for quick, neat pouring of materials. Comes with a hanging counterweight to compensate for...
(2) options
Location: Digital Thermometers
Test Mark supplies digital thermometers as part of a complete line of construction materials testing equipment.
(2) options
Location: Sample Bags
Plastic-lined sample bags from Test Mark are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory.
(4) options
Location: Test Platens
Test both cubes and cylinders. Used for testing 2” (50 mm) cubes and 3” (76 mm) diameter cylinders and cores in compression. Cube test set consists of a spherically seated platen assembly and a lower pedestal used for positioning the cube sample at the correct height for testing. The bearing block...
TM-720
Location: Digital Load Indicating Systems
Simultaneously displays both live load and rate of load, Designed for the harshest laboratory environments with a moisture/dust proof case, Accuracy of ± .5% of indicated load, Made in the USA. Display depicted after test is complete Spreadsheet The i720 is an easy to use digital load indicator...
SC-1400 Series Industrial Balance
(3) options
Location: GP Series Industrial Swing Arm Balance
SC-1400 Series Industrial Balance features swing arm type display, internal calibration, below balance weighing with optional under-hook, auto power off, AC adapter.
CA-1992
Location: Wet Washing Sieve
The stainless steel mesh cement washing sieve features nickel-plated brass frame and legs for support when drying.
CA-3110
Location: Vicat Apparatus
Modified Vicat Apparatus from Test Mark is used for false set determination of Portland cement mortar.
Bench Scale, 16 lbs. x 0.0002 lbs. (8000 g x 0.1 g)
SC-0122-A
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Bench Scale, 35 lbs. x 0.001 lbs. (16 kg x 0.5 g)
SC-0124
Location: Parts & Accessories
Large, easy to read, backlit LCD display, full range tare function, large stainless steel pan. 5 weighing units of kg, g, lb, oz, lbs:oz. Rechargeable battery for up to 90 hours operation and AC adapter. A hanger can be factory installed for below balance weighing.
Pad Caps and Retainer Rings - Steel
(16) options
Location: Unbonded Capping (Retainers and Pad Caps)
Pad caps and retainer rings are available from Test Mark as part of a complete line of concrete testing equipment and supplies.
4" Beam Fixture Conversion Kit
MA-0119-CK
Location: Test Platens and Spacers
Economical way to convert your Test Mark MA-0117-A1 or MA-0119-A1 Flexural Beam Fixture for testing beams with depths of either 4” or 6”. Kit Includes: One each Ball and Rod Support Base, eight Support Spring Locking Pins, two roll pins for Rod Base and one Top Support Transition Plate with 4”...