Product Search
Search results for 'D-1557'
Showing 181 - 200 of 1123 Total Results
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
(2) options
Location: Rebar Locator
Test Mark's Rebarscope™ locates reinforcement bars in concrete and determines their depth and size.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.
CA-2720
Location: Specific Gravity & Absorption Fine Aggregates
The conical mold and tamper from Test Mark are used to determine bulk and apparent specific gravity and absorption of fine aggregate.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
AA-0032
Location: Asphalt
This pedestal stabilizes molds during compaction. 8 x 8 x 18" wooden post capped with a 12 x 12 x 1" steel plate. Mounts to a concrete slab with four angle brackets.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
Compass CX Series Compact Scale
Location: Parts & Accessories
Compass CX Series Compact Scale from Test Mark is lightweight and portable and suited for use in the lab for quality control and soil sampling.
CA-1990
Location: Wet Washing Spray Apparatus
Test Mark's Wet Wash Spray Apparatus consists of a valve, pressure gauge, piping and spray nozzle.
(2) options
Location: Hydrometers
Hydrometer jars from Test Mark are used to suspend soil hydrometers in sodium hexametaphosphate solution for determining the amount of soil particles in a dispersed suspension.
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
SC-0180 Series Compact Balance
(7) options
Location: Core Series Compact Balance
Core compact balances from Test Mark feature selectable weighing units, stainless steel pan, low battery indicator, battery saving auto-power shut off, push button calibration using external mass, plastic draft shield and AC adapter.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
Compression Machine Mounting Stands
(2) options
Location: Compression Machine Mounting Stands
Compression Machine Mounting Stands are made of steel plate with the top plate and bottom flange parallel. Bolts and washers are included for securing the compression frame to the stand. Mounting stand elevates the compression machine 24.5” off the floor for the operator’s convenience & safety when...
AA-0005
Location: Marshall Basic Compression Testing
The Marshall compression machine from Test Mark features threaded rods and heavy duty steel crosshead, for nearly twice the rigidity of other load frames, for more reliable test results.
CA-1303
Location: Hot Plates
This double-burner light-duty hot plate has 5.5" diameter high-speed tubular range elements with infinite heat control. An adjustable leveling leg helps keep hot plate level and stable.
4" Beam Fixture Conversion Kit
MA-0119-CK
Location: Test Platens and Spacers
Economical way to convert your Test Mark MA-0117-A1 or MA-0119-A1 Flexural Beam Fixture for testing beams with depths of either 4” or 6”. Kit Includes: One each Ball and Rod Support Base, eight Support Spring Locking Pins, two roll pins for Rod Base and one Top Support Transition Plate with 4”...
