Product Search
Search results for 'T-191'
Showing 181 - 200 of 1123 Total Results
SA-1122
Location: Manometer Tubes
The economical free-standing Manometer Tube from Test Mark allows each tube to have its own valve to allow running two tests.
SA-2015
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 2.416" (61mm) high, 5-15/16" (150.8mm) dia.
SA-2015-L
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 1.416" (36mm) high, 5-15/16" (150.8mm) dia.
CA-0500-42
Location: Air Meter Calibrators
Brass reusable calibration vessel can be used with any 1/4 cu. ft. concrete pressure meter. Vessel is exactly 5% air by volume when placed in the pressure meter base. Part of our air meter calibrator products.
Plastic Beam Mold 6" x 6" x 21"
CA-0340
Location: Plastic Beam Molds
Test Mark's durable, lightweight plastic beam mold uses simple thumbscrews for easy stripping, cleaning, and assembly.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.
CA-6010
Location: Specimen Curing
Aquafog from Test Mark provides clouds of fog that will humidify concrete curing rooms...available as part of a complete line of concrete testing equipment.
(2) options
Location: Galvanized Pans
Galvanized material pans from Test Mark are used for performing concrete and aggregate test preparation.
CA-2860-01
Location: Concrete
Sturdy 3-legged painted steel stand is 20.5 in. high with adjustable neoprene rubber feet for leveling and isolation from vibration.
CPW+ Series Digital Field Scales
(10) options
Location: Digital Field Scales
Digital field scales from Test Mark feature four selectable weighing units, 12-inch square stainless steel platform, remote indicator with large 1-inch LCD display, and water resistant keypad.
(4) options
Location: Beam Molds
Steel Concrete Beam Molds from Test Mark are used for molding third or center point test samples.
SA-2031
Location: CBR Accessories
Used in the application of surcharged loads on the soil's surface during soaking and penetration. Rust-resistant. Slotted.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
CA-4009
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Case of 75.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
AA-0068
Location: Vacuum Pycnometer (Rice Test)
The vacuum pycnometer from Test Mark is used for determining the maximum specific gravity of bituminous paving mixtures with a maximum aggregate size up to 3/4-inch and a 2,000 g capacity.
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
CA-0970
Location: Test Hammer (Rebound)
The calibration test anvil from Test Mark Industries is used to check the calibration accuracy of a test hammer.
