Product Search
Search results for 'C359'
Showing 221 - 240 of 1124 Total Results
Construction Evaporation Meter
CA-5200
Location: Weather Tracker
Test Mark's Construction Weather Tracker displays evaporation rates for concrete testing applications.
CA-0842
Location: Temperature/Humidity
Simultaneously displays both room and probe current temperature and humidity, with push button minimum/maximum memory recall function. Measuring range: Temperature 14 to 140 F (-10 to 60 C); Precision +/- 1.4 F (+/- .8 C) from 50 to 86 F (10 to 30 C), otherwise +/- 1.8 F (+/- 1 C). Humidity: 10 to...
(2) options
Location: Trowels
Test Mark's strike-off trowels are used to strike off and smooth excess concrete and grout from the surface of molds.
SA-2000
Location: CBR Load Frames
The CBR (California Bearing Ratio) loading press from Test Mark uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample.
SA-2019
Location: CBR Accessories
100 pack of coarse grade paper filter, used to separate spacer disc and soil in the CBR mold during compaction operation or over the top surface of the soil when the compaction operation is completed.
(2) options
Location: Sodium Hexametaphosphate
Sodium Hexametaphosphate from Test Mark is used as a dispersing agent used in hydrometer analysis of soils.
Muffle Furnace 4 1/4" x 5" x 6"
CA-1480
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side to provide uniform temperature.
CA-1485
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side provide uniform temperature.
Location: Concrete
Experts recommend the RH test as the most reliable in-depth measuring method for concrete moisture available today. The Blue Peg System measures relative humidity, temperature and dew point using a single microchip, factory calibrated to NIST standards. Each Blue Peg comes with a NIST traceable...
(2) options
Location: Flow Cones
The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
Highland Series Portable Precision Balance
(7) options
Location: Highland Series Portable Precision Balance
Balance has the following features: selectable weighing units of g, ct, lb, oz, d, GN, ozt, dwt, mom, TL, and mom, percentage weighing and below balance weighing functions, stainless steel pan, adjustable feet, low battery indicator and auto-power shut off, manual internal calibration with built in...
(1) option
Location: Carrier Brackets for Masonry Platen
Easier and safer mounting of Block Platen.. The Carrier Bracket is used for safer removal and mounting of the block platen assembly inside the load frame, and should be considered a must have option when testing masonry units. The brackets heavy duty arm is mounted on the rear left hand corner of...
