Product Search
Search results for 'D-2167'
Showing 241 - 260 of 1124 Total Results
CA-1310
Location: Hot Plates
These durable hotplates are equipped with thermostatic temperature control. Baffle-vented welded stainless-steel case and cast-aluminum top for maximum heat transfer, strength and corrosion resistance.
SA-0362-01
Location: Soils
Special adhesive backed absorbent paper that adds no fiber to soil samples. Sold 50 sheets per package.
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Mortar Penetration Resistance Apparatus
CA-2830
Location: Mortar Penetration Resistance
The mortar penetration resistance apparatus from Test Mark Industries determines the time of setting of concrete by penetration resistance.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
CA-3130
Location: Vicat Apparatus
Used with CA-3110 Modified Vicat Apparatus for false set determination, mold is 2" x 2" x 6" (50mm x 50 mm x 150mm). Overall length including base is 9 ¼" (240 mm).
CA-1302
Location: Hot Plates
Durable die-cast single burner hot plate features high, medium, low and warm temperature settings. Power-on indicator light. Easy to use and clean.
Concrete Cylinder Length Measuring Device for 4 & 6''Dia-24''L
CA-0237
Location: Core Length
With the core length measuring device measurements can be taken at the center point of the sample's upper end as well as the 8 equidistant points along the circumference.
(2) options
Location: Sodium Hexametaphosphate
Sodium Hexametaphosphate from Test Mark is used as a dispersing agent used in hydrometer analysis of soils.
SA-2020
Location: CBR Accessories
Dial indicator has 1.000" operating range, graduated in 0.001" divisions, clockwise movement and revolution counter. Recommended for use with tripod attachment.
CA-0700
Location: Chase Air
The Chase Air Indicator from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
(6) options
Location: Scoops
Test Mark supplies a variety of round mouth and flat bottom scoops for use in the construction materials testing industry.
(3) options
Location: Reference Thermometer
Test Mark Industries provides reference thermometers as part of a complete line of materials testing supplies.
CA-0850
Location: Concrete Penetrometer
The Concrete Pocket Penetrometer from Test Mark is lightweight for field and lab evaluation of the initial set of concrete mortar based on ASTM C-403.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers.. The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel with...
CA-3202
Location: Tube Samplers
The Packaged Cement Tube Sampler from Test Mark Industries is used for sampling packaged hydraulic cement.
SC-0180 Series Compact Balance
(7) options
Location: Core Series Compact Balance
Core compact balances from Test Mark feature selectable weighing units, stainless steel pan, low battery indicator, battery saving auto-power shut off, push button calibration using external mass, plastic draft shield and AC adapter.
(2) options
Location: 6" Cube Mold
This single cavity cube mold with base plate is used for compression testing of concrete cubes or mortar samples in the "Time of Initial" and "Final Setting" of concrete. Dimensions: 6" x 6" x 6" (152 x 152 x 152 mm).
