Product Search
Search results for 'C-174'
Showing 21 - 40 of 1647 Total Results
CA-0320
Location: Parts & Accessories
These lightweight stamped steel beam molds are used for molding third or center point test samples. Molds are hinge free to collapse into interchangeable parts for easy stripping, cleaning and quick reassembly with wing nuts.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams.. Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks are...
(4) options
Location: Test Platens
Test both cubes and cylinders. Used for testing 2” (50 mm) cubes and 3” (76 mm) diameter cylinders and cores in compression. Cube test set consists of a spherically seated platen assembly and a lower pedestal used for positioning the cube sample at the correct height for testing. The bearing block...
Tamping Rod 24" long x 5/8" dia.
CA-0400
Location: Parts & Accessories
Tamping Rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test. Hemispherically rounded on both ends and plated for corrosion resistance.
(4) options
Location: Manual Compression Testing Machines
Testing range of 5,000 to 500,000 lbs. (22.2 – 2,224 kN) with an accuracy of ±.5% of indicated load., Frame stiffness rating of 41.6 million lbs/in., Easier specimen loading with large platen table.. Request a Quote Our CM-5000 series machines feature rigid distortion-resistant load frames designed...
SA-0113
Location: Sample Ejector
The Soil Sample Ejector from Test Mark is used for removing soil samples from molds up to 7 in. long and 2, 3 and 4 in. dia. Shelby Tubes.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
AA-2020
Location: Reflux Extractor
Pressure Limit Device from Test Mark is used with Reflux extractors to protect copper condenser from excessive pressure.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
Prism Mold 1"x 1"x 10" - 1 gang
CA-2954
Location: Parts & Accessories
Gang Molds from Test Mark are designed to produce the required 10 inch gauge length prism molds. Easy and secure ordering online.
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
(4) options
Location: Beam Molds
Steel Concrete Beam Molds from Test Mark are used for molding third or center point test samples.
CA-2950
Location: Comparator, Length Change
The Comparator from Test Mark Industries measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers.. The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel with...
Fresh Concrete Field Testing Kits, 6" x 12"
CA-0510
Location: Fresh Concrete Field Testing
Fresh concrete kits contain everythiung you need for routine testing of fresh concrete testing in the field, with all items meeting ASTM standards.
CA-4060-01
Location: Aggregate
Plastic measuring cylinders are 17 in. high, 1 1/4" inside diameter and are graduated from 0 - 15 in. by 0.1 in. graduations from bottom of cylinder.
CA-2582
Location: Parts & Accessories
The Rebarscope™ enables the user to not only locate reinforcement bars but also determines depth and size. Rebar diameter can be estimated by using a fully automated simple system of comparison. Feedback to the user can be made via the digital screen or via head phones. Optional software allows the...
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
CA-0358
Location: Self-Consolidating Concrete
The V-Funnel is used to measure flowability of fresh self-consolidating concrete. The funnel is filled and the time taken for it to flow through the apparatus is measured. A valve on the outflow port can be closed to allow SCC to settle, which indicates the tendency for segregation.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.
