Product Search
Search results for 'D6910'
Showing 381 - 400 of 1124 Total Results
(3) options
Location: Spacers
Spacers are used to adjust the vertical testing height inside compression testing machine load frames when testing samples of various heights. Spacer mounts to the top cross head of the load frame. Spacer is manufactured from steel and is precision ground on both ends and painted for rust...
Compression Machine Mounting Stands
(3) options
Location: Compression Machine Mounting Stands
Compression Machine Mounting Stands are made of steel plate with the top plate and bottom flange parallel. Bolts and washers are included for securing the compression frame to the stand. Mounting stand elevates the compression machine 24.5” off the floor for the operator’s convenience & safety when...
(12) options
Location: Piston & Cylinder Seals
Piston and Cylinder Seals for compression machines. Please check your model number for the correct seals.
CA-2060
Location: Sieve Brushes
Fine Sieve Brush from Test Mark - Brush fibers are made from long-lasting nylon and is excellent for brushing material from the sieve to the scale pan.
CA-2730
Location: Specific Gravity Bench
The density basket from Test Mark is used to determine bulk specific gravity and absorption of coarse aggregates.
CA-2700
Location: Specific Gravity Flasks
The Chapman flask from Test Mark has two bulbs for determining approximate percentage of voids and surface moisture in fine aggregates.
(3) options
Location: Glass Filter Flask
Filter flasks from Test Mark feature a heavy wall filter flask with hose connection and silicone stopper.
AA-0010
Location: Marshall Basic Compression Testing
The lower segment of Test Mark's Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments.
AA-0011
Location: Marshall Basic Compression Testing
The lower segment of the Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments - from Test Mark.
AA-0015
Location: Marshall Basic Compression Testing
The dial indicator consists of a maximum position brake assembly and guide sleeve. Accommodates 4" or 6" breaking heads. Graduations of 0.01" div., range 1.00"...
CA-0285
Location: Cube Molds
The Econ-O-Cube mold from Test Mark forms three 2-inch cubes at one time in a diagonal arrangement. Easy and secure online ordering.
CA-0286
Location: Cube Molds
The 2-inch cube maker molding system from Test Mark uses watertight polypropylene liners which fit into a 3-gang metal mold frame.
CA-0361-S
Location: Slump Testing
Test Mark's portable slump test sets consist of a steel slump cone, tamping rod, cast-aluminum test base with handle for easy transportation and round mouth scoop.
CA-0360-S
Location: Slump Testing
Test Mark's portable slump test sets consist of a steel slump cone, tamping rod, and cast-aluminum test base with handle for easy transportation.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
CA-4009
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Case of 75.
CA-0355
Location: Concrete
The J-ring is used to determine the flowability and passing ability of self-consolidating concrete. Zinc plated for rust resistance.
