Product Search
Search results for 'T-197'
Showing 421 - 440 of 1648 Total Results
Sieve, 8" dia., #100 Mesh, Half Height, Brass Frame, Brass Mesh
CA-1850-08HB
Location: Parts & Accessories
Each test sieve is supplied with a Serial Number and a matching Certificate of Compliance. Overall height - Full 2 5/8", Half 1 5/8". Depth to cloth - Full 2", Half 1" FS - Full height, stainless steel mesh HS - Half height, stainless steel mesh FB - Full height, brass mesh HB - Half height, brass...
CA-0842
Location: Temperature/Humidity
Simultaneously displays both room and probe current temperature and humidity, with push button minimum/maximum memory recall function. Measuring range: Temperature 14 to 140 F (-10 to 60 C); Precision +/- 1.4 F (+/- .8 C) from 50 to 86 F (10 to 30 C), otherwise +/- 1.8 F (+/- 1 C). Humidity: 10 to...
CA-0789
Location: Min/Max Thermometers
Test Mark's min-max thermometer indicates present temperature and the highest/lowest temperatures since last reset.
CA-1400
Location: Lab Ovens
These gravity convection ovens are used for drying, baking, sterilizing, evaporating, heat-treating, and testing. 0.7 cu. ft. model.
CA-1405
Location: Lab Ovens
These gravity convection ovens are used for drying, baking, sterilizing, evaporating, heat-treating, and testing. 1.27 cu. ft. model.
CA-1410
Location: Lab Ovens
These gravity convection laboratory ovens are used for drying, baking, sterilizing, evaporating, heat-treating, and testing. 2.0 cu. ft. model.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
CA-4030
Location: Void Content
The void content apparatus from Test Mark is used to determine the non-compacted void content of a fine aggregate sample.
Perpendicular Verification Device, 6" x 12" Cylinders
CA-0295
Location: Parts & Accessories
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
SA-0322
Location: Parts & Accessories
The Motorized Liquid Limit Machine gives uniform testing with greater degree of accuracy and includes a geared motor to give proper operating speed. This unit is mounted to a metal plate with rubber feet. All units include a brass cup, hand mechanism with carriage and crank mounted on a hard rubber...
S.S. Pan 20 3/4" x 12 3/4" x 4"
CA-2600
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
S.S. Pan 9 1/2 x 11 7/8 x 2 1/2
CA-2605
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
S.S. Pan 6 3/8" x 10 3/8" x 2 1/2"
CA-2610
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
AA-0040
Location: Marshall Hand Compaction Hammer
The Hand Compaction Hammer set from Test Mark Industries facilitates hand compaction of 4-inch samples.
CA-2650
Location: Parts & Accessories
These plastic-lined sample bags are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory. The plastic lining retains moisture in samples to ensure more accurate test results. The bags are made from heavy-yarn drill cloth woven diagonally for extra strength...
CA-1450
Location: Gloves
Test Mark's heat resistant gloves are used for handling heated items when conducting laboratory work with ovens or hot plates.
Sieve, 8" dia., #200 Mesh, Full Height, Stainless Frame, Stainless Mesh
CA-1870-08FSS
Location: Parts & Accessories
Sieve, 8" dia., #200 Mesh, Half Height, Stainless Frame, Stainless Mesh
CA-1870-08HSS
Location: Parts & Accessories
