Product Search
Search results for 'C-1064'
Showing 481 - 500 of 1123 Total Results
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
SA-1120
Location: Manometer Tubes
The economical, wall mount Manometer Tube from Test Mark is built for use with many permeameters.
SA-1122
Location: Manometer Tubes
The economical free-standing Manometer Tube from Test Mark allows each tube to have its own valve to allow running two tests.
SA-0362
Location: Plastic Limit
Test Mark's Plastic Limit Roller for soils is a unique time-saving device designed to produce consistent results by an easily repeatable mechanical technique.
(2) options
Location: Proctor Molds, split
Split proctor molds from Test Mark are manufactured from steel with all parts plated for longer life.
CA-4020
Location: Proportional Caliper
The proportional caliper from Test Mark is a timesaving device used for rapid determination of percentages of flat and elongated particles in coarse aggregate fractions of .375" or larger.
Circulating Water Bath, Digital
AA-0065
Location: Circulating Water Bath
The circulating water bath from Test Mark is fully insulated with magnetic circulator for heating up to 12 4-inch diameter Marshall samples at a time.
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
CA-3110
Location: Vicat Apparatus
Modified Vicat Apparatus from Test Mark is used for false set determination of Portland cement mortar.
AA-0069
Location: Vacuum Pycnometer (Rice Test)
Heavy-duty vibrating table, with variable-speed control, keeps sample material loose for more reliable test results - from Test Mark Industries.
CA-3000
Location: Flow Tables
Hand driven flow tables are used to determine consistency of cement mortars. A test specimen is molded on the table to a specified volume and shape.
AA-0032
Location: Asphalt
This pedestal stabilizes molds during compaction. 8 x 8 x 18" wooden post capped with a 12 x 12 x 1" steel plate. Mounts to a concrete slab with four angle brackets.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
Drive Tubes, 3" x 2.75" (76.2 x 69.9 mm), 10/pkg
SA-1371
Location: Density Drive Sampler
For use with Drive Sampler, 3" (76.2mm) x 2.75" (69.9mm) length, (3" x 0.01 ft3). Accessory to the density drive sampler.
Drive Tubes, 4" x 5.00" (101.6 x 127 mm), 10/pkg
SA-1372
Location: Density Drive Sampler
For use with Drive Sampler, 4" (101.6mm) x 5" (127mm) length, (4" x 0.033 ft3).
