Product Search
Search results for 'D-1557'
Showing 81 - 100 of 1123 Total Results
(2) options
Location: Permeameters
The Compaction Permeameter from Test Mark is used for determining permeability of clay, sand and gravel soils using the Proctor plasticity compaction method.
Dynamic Cone Penetrometer only
SA-1225
Location: Dynamic Cone Penetrometer
The Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20" and can be used effectively in augured holes to depths of 15 to 20 feet. The DCP features a heat treated cone and zinc plated components.
Plastic Beam Mold 6" x 6" x 21"
CA-0340
Location: Plastic Beam Molds
Test Mark's durable, lightweight plastic beam mold uses simple thumbscrews for easy stripping, cleaning, and assembly.
CA-2500
Location: Sample Splitters
The Test Mark mini sample splitter accurately divides dry materials, such as cement, powdered ores, coal, coke, sand, soils and other fine aggregates, so each half is representative of the original total sample.
CA-0470
Location: Rubber Mallet
The rubber mallet from Test Mark is used to consolidate materials and release entrapped air in concrete molds, air meters, slump cones and unit weight buckets.
CA-0851
Location: Cement
Penetrometer Foot is a stainless steel disk, 2.70" (68.58 mm) dia. for use with masonry mortars to determine board life and initial consistency.
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
CA-4060-04
Location: Aggregate
The weighted foot assembly is lowered into the cylinder when determining the sand reading.
SA-0240
Location: Soil Pocket Penetrometer
The Soil Pocket Penetrometer from Test Mark is used for the evaluation and classification of cohesive soils in terms of soil consistency.
SA-2019
Location: CBR Accessories
100 pack of coarse grade paper filter, used to separate spacer disc and soil in the CBR mold during compaction operation or over the top surface of the soil when the compaction operation is completed.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Digital Static Cone Penetrometer
SA-1510
Location: Static Cone Penetrometer
Digital Static Cone Penetrometer from Test Mark features a large digital readout making testing and recording readings easy.
(5) options
Location: Shelby Tubes
Shelby Tubes from Test mark feature a chamfered end that forms a cutting edge, and includes holes for securing tubes to a drive head.
CA-0355-SP
Location: Self-Consolidating Concrete
Test Mark's J-Ring Test Set is used to characterize the ability of self-consolidating concrete (SCC) to pass through reinforcing steel.
Spacers for CM-4000 and CM-5000 Series
(2) options
Location: Spacers
Spacer Assembly for Compresson Machines is used to adjust the inside vertical testing height of the compression machine load frame for testing samples of various heights.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams. . Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks...
SA-3500
Location: Mud Balance Testing
Mud Balances are used as standard procedure instruments for testing water and oil-base drilling fluids and oil well cements.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers. . The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel...
TM-2270
Location: Digital Load Indicating Systems
The new TM-2270 is an easy-to-use economical Digital Load Indicator loaded with features found in more expensive units.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
