Product Search
Search results for 'T-197'
Showing 81 - 100 of 1648 Total Results
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
CA-0915
Location: Specimen Curing
Portable curing chest is lightweight and easily folded for storage. Made with advanced polymers and vinyl with 1/2" cooler foam, chest holds up to eight (9) 6" x 12" concrete test cylinders.
CA-0100
Location: Parts & Accessories
Test Mark's Ultra-Strength Capping Compound is used to cap the ends of concrete test cylinders so compression force will be evenly distributed to the cylinder during testing.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
CA-2170
Location: 30 Minute Timer
Plug aggregate equipment into the outlet at the back of the timer. Then plug timer cord into a wall outlet and turn the knob to the desired time. Time switch will turn off equipment automatically when time expires.
Concrete Beam Tester, 18" Span, Single Point
CA-0342
Location: Parts & Accessories
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6" x 6" cross-section beams. Hydraulically driven unit retains maximum reading to eliminate lost data. Gauge resets to zero for repeat tests. Lightweight aluminum unit has dual...
Concrete Beam Tester, 16" Span, Single Point
CA-0344
Location: Parts & Accessories
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6" x 6" cross-section beams. Hydraulically driven unit retains maximum reading to eliminate lost data. Gauge resets to zero for repeat tests. Lightweight aluminum unit has dual...
6" x 12" (152 x 305 mm) Steel Mold
CA-0250
Location: Parts & Accessories
Manufactured from .25" (6.3 mm) thick seamless steel pipe for durability, body is longitudinally split so mold will spring open when unclamped. All parts plated for corrosion resistance and longer life. Detachable base plate included. NOTE: Shipping may vary due to size and weight of this item.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
(4) options
Location: Test Platens
Models available for testing up to 12” (305 mm) CMUs.. All models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion resistance. The bearing block...
CA-2180
Location: Parts & Accessories
Aggregate samples are automatically washed to remove clay and other fines passing a No. 200 sieve. Inconsistencies and the high cost of manual methods are eliminated.
(5) options
Location: Unit Weight Buckets
Aluminum cylindrical unit weight measures from Test Mark have machined interior surfaces, carrying handles, true and even top and bottom surfaces, are water-tight and will retain form after repeated use.
MA-0135
Location: Concrete Cylinder Loading Shelf, CM-2500 Series
Easier loading of 6” cylinders in CM-2500 series machines.. This optional shelf was designed to make loading and positioning of 6” (152 mm) cylinders with pad cap rings both easier and safer in a CM-2500 series machine. The shelf features a heavy-duty steel design with a plastic laminated top, so...
Digital Static Cone Penetrometer
SA-1510
Location: Static Cone Penetrometer
Digital Static Cone Penetrometer from Test Mark features a large digital readout making testing and recording readings easy.
AA-0035
Location: Asphalt
Holder mounts on compaction pedestal and centers the compaction mold over the center of the post. Mold holder keeps mold, collar and base plate securely positioned during compaction.
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
CA-3032
Location: Flow Tables
Measure is calibrated to 400 ml and is used to determine air content of hydraulic cement mortar. Cylindrical measure is 3" (76 mm) ID and approximately 3 15/32" (88 mm) deep.
TM-2270
Location: Digital Load Indicating Systems
The new TM-2270 is an easy-to-use economical Digital Load Indicator loaded with features found in more expensive units.
Cube Molding Retainers and Pads
(3) options
Location: Cube Retainers and Pads
Cube retainers and pads are used with retainer caps in the cube molding system; pads are molded for consistent shape and thickness - from Test Mark.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
